GA-1001-C Electronic Loading Melt Flow Index Tester

Penerangan

GA-1001-C Electronic Loading Melt Flow Index Tester

Standard:

GB/T3682-2018,ISO1133-2011, ASTM D1238-13

GA-1001-C Electronic Loading Melt Flow Index Tester

Penerangan:

This is for high-precision melt flow rate instrument tester, used for testing all kinds of plastic, resin in the state of viscous flow through a certain temperature and load, every 10 min module and melt flow rate through the standard port MFR/MVR value, it is suitable for high temperature of polycarbonate, aromatic sulfone, fluorine plastics, nylon engineering plastics, can also be applied to polyethylene (PE), polisterin (PS), polipropilena (PP), ABS resin, polyformaldehyde (POM), polycarbonate (PC) resin with lower melting temperature, such as plastic test, widely used in plastic production, plastic products, petrochemical industry and related colleges and universities.

GA-1001-C Electronic Loading Melt Flow Index Tester

Watak Produk:

Ø 1.More paragraphs (3) temperature control method, three groups of platinum resistance sensor, the three heating jacket separate temperature control, high accuracy intelligent PID control, ramp rate the heating speed is adjustable

Ø 2.Resolution temperature was 0.1 ℃, the temperature fluctuation of not more than 0.5 ℃ within 24 Jam, the displacement sensor resolution is 0.001 mm.

Temperature and temperature protection device

Ø 3.Hand automatic cutting material, can be arbitrary set blanking time (0 ~ 999), blanking times (0 ~ 999)

Ø 4.Test can choose quality standard, or volume method, two test methods or simultaneously, and can calculate flow rate ratio.Both methods start testing when the piston rod moves to a certain location.

Ø 5.Can be set up in 240 detik (GB3682 regulations) material preheat second countdown, after the end of the countdown, farmar automatically loaded, loaded to interval start automatic cutting, can also set the American standard (ASTM) preheating time, dan lain-lain.

Ø 6.Built-in many plastic material melt index test conditions, convenient customer used to be obtained at any time, reduce the tedious work, and storing the last test conditions and results

The internal microtyping machine is convenient for printing and testing data

Ø 7.High precision touch screen controller, 7 inch touch screen, can be stored and print test conditions and data recently, test print menu Settings include test time (the default), the material name, test conditions (suhu, weight weight, blanking intervals), test results data.

Ø 8.Reserved RS232 interface or USB interface to connect computers, can through the computer control instrument operation and to save test data transmission to the computer,

Ø 9.Can manually loading weight or by stepping motor drives the ball screw rotation in order to achieve the purpose of automatic control at the top of the load weight increase or decrease

Kaedah Ujian:MFR +MVR Methods

Mod Paparan:Paparan skrin sentuh warna Inggeris

GA-1001-C Electronic Loading Melt Flow Index Tester

Spesifikasi

Model	GA-1001-C
Parameter tong	Inner hole 9.550±0.005mm length 163mm
Pistons head parameters	Kepala omboh: 9.474±0.005mm
Piston rod diameter	8.94mm
Mold length	8.000±0.025mm
Mold nominal inner diameter	2.0955±0.0051mm
Half die length	4.000±0.025mm
Half die nominal inner diameter	1.050±0.005mm
Parameter suhu	Dengan instrumen kawalan suhu pintar, dengan empat pasang kawalan tetapan suhu yang ketara, Parameter PID boleh ditetapkan secara automatik, ketepatan sehingga ± 0.1 darjah centigrade
Kadar suhu	Room Temperature~500degree centigrade
Turun naik suhu	±0.2 ℃
Keseragaman suhu	±1 ℃
Resolusi paparan suhu	0.1℃
Resolusi paparan	0.1℃
Penggunaan maksimum	< 600W
Resolusi paparan masa	0.1s
Parameter berat adalah seperti berikut:
Ketepatan berat	±0.5%
Konfigurasi asas	A 0.325kg
	B 1.2kg
	C 2.16kg
	D 3.8kg
	E 5kg
	F 10kg
	G 12.5kg
	H 21.6kg
Pengesanan kedudukan
Jarak gelung dari atas dan bawah	30mm
Ketepatan kawalan	± 0.1mm
Kawalan aliran ujian
Masa memotong bahan	0~10 kali
Selang pemotongan bahan	0~999s(tetapkan Jadual rujukan 2)
Aliran kawalan mencapai suhu yang ditetapkan tanpa turun naik
Masa suhu tong	15 min.
Bahan dipasang	1 min.
Masa pemulihan suhu sampel bahan	4 min.
Apabila pengikat ditetapkan	1min
Mod keluaran	Output cetakan mikro automatik
Kaedah bahan potong	Tangan automatik dipotong menjadi satu badan
Beban ujian	Lapan set berat
Kuasa	AC220V±10% 50/60HZ