GA-1001-B Touched Screen Melt Flow Index Tester
- Penerangan
- Siasatan
Penerangan
GA-1001-B Touched Screen Melt Flow Index Tester
Standard:
GB/T3682-2000 《Determination of melt flow rate and melt volume flow rate of thermoplastics》
ISO 1133：1997《Determination of melt flow rate and melt volume flow rate of thermoplastics》
ASTM D1238 《Standard Test Method for Determination of flow rate of Thermoplastic Melt by extruded plasticizer》
GA-1001-B Touched Screen Melt Flow Index Tester
Description:
Used for testing all kinds of plastic, resin in the state of viscous flow through a certain temperature and load, every 10 min module and melt flow rate through the standard port MFR value, it is suitable for high temperature of polycarbonate, aromatic sulfone, plastik fluorin, nylon and other engineering plastics, can also be applied to polyethylene (PE), polisterin (PS), polipropilena (PP), ABS resin, polyformaldehyde (POM), polycarbonate (PC) resin with lower melting temperature, such as plastic test, widely used in plastic production, plastic products, such as petroleum and chemical industry and related colleges and universities, scientific research units, and the commodity inspection department.
Kaedah Ujian:MFR+MVR Methods
Display mode: 7-inch touch screen controller
Watak Produk:
1.Bahasa Inggeris LCD Sentuh Skrin.Ø
2.Hand and Automatic cutting material.
3.Sistem kawalan suhu berganda, ketepatan kawalan suhu adalah lebih tepat, kecekapan pemanasan yang lebih tinggic
4.Penderia import berganda, kecerunan suhu yang lebih tepat dari atas ke bawah, boleh digunakan secara bebas, dan meningkatkan hayat perkhidmatan.
5.Silinder untuk import rawatan nitriding mengaloi hartz, acuan pembukaan untuk bahan keluli tungsten karbon, realiti material.
6.Tong penebat bahan keluli tahan karat sus304 untuk keseluruhannya, suhu tinggi jangka panjang tidak berkarat.
7.Keputusan pengiraan automatik, dan cetak.
8.Have USB connector,can connect computer.
GA-1001-B Touched Screen Melt Flow Index Tester
Spesifikasi
| Model | GA-1001-B |
| Loading Barrel parameters | Inner hole Φ9.550±0.025mm |
| Cylinder diameter | Φ2.095±0.005mm
|
| Panjang keluar | 8.000±0.025mm |
| Kadar suhu | Room Temperature~450℃ |
| Turun naik suhu | ±0.2 ℃ |
| Keseragaman suhu | ±1 ℃ |
| Resolusi paparan suhu | 0.1℃ |
| Resolusi paparan | 0.1℃ |
| Resolusi paparan masa | 0.1s |
| Displacement accuracy | 0.001mm
|
| Volume timing accuracy | 0.001s
|
| Testing scope of mass method | 0.1-150g/10min
|
| Range of test results by volumetric method | 50-5000cm³/10min
|
| Parameter berat adalah seperti berikut: | |
| Ketepatan berat | ±0.5% |
| Konfigurasi asas
|
A 0.325kg |
| B 1.2kg | |
| C 2.16kg | |
| D 3.8kg | |
| E 5kg | |
| F 10kg | |
| G 12.5kg | |
| H 21.6kg | |
| Pengesanan kedudukan | |
| Jarak gelung dari atas dan bawah | 30mm |
| Ketepatan kawalan | ± 0.1mm |
| Kawalan aliran ujian | |
| Masa memotong bahan | 0~10 kali |
| Selang pemotongan bahan | 0~999s(tetapkan Jadual rujukan 2) |
| Aliran kawalan mencapai suhu yang ditetapkan tanpa turun naik | |
| Masa suhu tong | 15 min. |
| Bahan dipasang | 1 min. |
| Masa pemulihan suhu sampel bahan | 4 min. |
| Apabila pengikat ditetapkan | 1min |
| Mod keluaran | Output cetakan mikro automatik |
| Kaedah bahan potong | Hand and Automatic Cut |
| Beban ujian | Lapan set berat |
| Kuasa | AC220V±10% 50/60HZ |
