GA-1012 DIN Abrasion Tester
- Penerangan
- Siasatan
Penerangan
GA-1012 DIN Abrasion Tester
Standard
DIN ISO 4649:2006-11 (E). Getah, vulcanized or thermoplastic – Determination of abrasion resistance using a rotating cylindrical drum device.
ASTM D5963 – 04(2010)e1 Standard Test Method for Rubber Property—Abrasion Resistance (Rotary Drum Abrader).
GA-1012 DIN Abrasion Tester
Prinsip
Under a predetermined contact pressure and a given area ,the specimen with sandpaper angled to measureabrasion resistance of the specimen subjected to rubbing on a certain level of sandpaper, sandpaper affixed to the surface of the drum, samples pressed on a drum with sandpaper, and the specimen along the roller to the lateral movement, abrasion resistance is produced at one end of the cylindrical specimen, tests the value of the mass loss of the specimen, by the density of the specimen to calculate the amount of volume abrasion.
GA-1012 DIN Abrasion Tester
Permohonan
DIN Rubber Wear Abrasion Tester is used to test the friction of surface by a particular piece of abrasive paper, After wear for a certain time, and then assess the condition of material surface, berat badan, volume and thickness, from this standard to assess the abrasive nature of materials, as such elastic material, getah, tires, convey belt, transmit belt, sole, synthetic leather, leather and others
Permohonan
DIN Rubber Wear Abrasion Tester is used to test the friction of surface by a particular piece of abrasive paper, After wear for a certain time, and then assess the condition of material surface, berat badan, volume and thickness, from this standard to assess the abrasive nature of materials, as such elastic material, getah, tires, convey belt, transmit belt, sole, synthetic leather, leather and others
GA-1012 DIN Abrasion Tester
Specifications
| Design Standards | DIN-53516,ISO-4649，GB/T9867
|
| Specimen size | diameter 16mm, ketinggian 6-16 mm |
| Load | 2.5N,5N,10N |
| Rotating wheel | diameter 150mm, length 460mm, rotating speed 40rpm |
| Roller rotation speed | 40rpm |
| Remove range | 4.2mm/R.P.M. |
| Kelajuan | 19.2m/minute |
| Aksesori | Sand paper,standard glue,sample cutter. |
| Berat badan | 70kg |
| Dimention | 85×32×40cm |
| Kuasa | 1Ø, AC 220V, 50 ~60Hz 3A |
GA-1012 DIN Abrasion Tester
Standard
DIN ISO 4649:2006-11 (E). Getah, vulcanized or thermoplastic – Determination of abrasion resistance using a rotating cylindrical drum device.
ASTM D5963 – 04(2010)e1 Standard Test Method for Rubber Property—Abrasion Resistance (Rotary Drum Abrader).
