Probador de bobinado de impulso Tonghui TH2883S4-5
- Descripción
- Consulta
Descripción
Probador de bobinado de impulso
Características
The first provider of impulse winding tester from low voltage of 30V to high voltage of 10kV, single channel to multichannel in this industry (Máx.:8 canales)
First winding tester compatible with LXI standard Impulse voltage of 100V~5000V
Two models of 4-channel and 8-channel4 for selection
Each channel can be programmed and controlled as high- Terminal, low-terminal and OFF
20 test procedures can be added at most 65k color 7” TFT wide display screen
Up to 200Msps waveform sampling rate
Maximum measuring speed: 6medida/seg
Storage depth of 6k Bytes
High bandwidth analog acquisition circuit
High-fidelity corona extraction algorithm (patent technology)
Four waveform comparison methods
Automatic storage of instrument parameters
Measurements on voltage, time and frequency
Amplification, stretch and movement of the waveform for accurate display
Multi-sample average, average processing of 32 standard waveforms
Destructive testing for your correct choose of voltage
Use demagnetized impulse to ensure the conformity of tested waveforms
Login of different user right for easy management
20 groups of instrument files can be stored and automatically loaded
Screen information can be stored in USB disk (COPY key)
System firmware can be automatically upgraded through
USB-disk
Selectable Chinese and English operation interfaces
Four selectable display interface effects
Foot control interface for easy measurements
Handler interface to realize on-line operation
RS232C, USB Device and LAN interface to realize remote control
20 test procedures can be added at most 65k color 7” TFT wide display screen
Up to 200Msps waveform sampling rate
Maximum measuring speed: 6medida/seg
Storage depth of 6k Bytes
High bandwidth analog acquisition circuit
High-fidelity corona extraction algorithm (patent technology)
Four waveform comparison methods
Automatic storage of instrument parameters
Measurements on voltage, time and frequency
Amplification, stretch and movement of the waveform for accurate display
Multi-sample average, average processing of 32 standard waveforms
Destructive testing for your correct choose of voltage
Use demagnetized impulse to ensure the conformity of tested waveforms
Login of different user right for easy management
20 groups of instrument files can be stored and automatically loaded
Screen information can be stored in USB disk (COPY key)
System firmware can be automatically upgraded through
USB-disk
Selectable Chinese and English operation interfaces
Four selectable display interface effects
Foot control interface for easy measurements
Handler interface to realize on-line operation
RS232C, USB Device and LAN interface to realize remote control
Probador de bobinado de impulso
Parámetro técnico
| Modelo | TH2883S8-5 | TH2883S4-5 | |
| Voltaje de impulso | 100V-5000V10V steps | ||
| Precisión de voltaje | ±(5% valor establecido +15V) | ||
| Precisión de lectura | ±(5% valor real +15V) | ||
| Canales | 8 | 4 | |
| Rango de prueba de inductancia | ≥10uH | ||
| Energía de impulso | Máx.: 0.25 Joule | ||
| Prueba de velocidad | 6 veces/segundo (single channel, single step) | ||
| Legumbres Aplicadas | Máx.: 32 | ||
| Impedancia de entrada | 5MΩ | ||
| Mostrar | 800×480 puntos, 65k color TFT; Rango de visualización de forma de onda: 600×256 | ||
| Adquisición de forma de onda | Tasa de muestreo: máx.. 200msps, 8 niveles ajustablesResolución: 8 BitsProfundidad de memoria: 6k BytesPromedio: 1 a 32 | ||
| Métodos de comparación | Comparación con la forma de onda estándar:
|
||
| Medición de forma de onda | Voltaje/Frecuencia/Tiempo | ||
| Modo de disparo | Manual/Externo/Bus/Interno | ||
| Salida de detección | Pass/Fail display/LED/ Alarm | ||
| Estadísticas de medición | Estadísticas para resultados de medición | ||
| Memoria | 20 Los grupos de datos de formas de onda estándar y la configuración del instrumento se pueden almacenar en la memoria interna no volátil. La memoria flash USB se puede utilizar como memoria externa.. | ||
| Interfaz | Manipulador, RS232C, Dispositivo USB, Puerto USB, LAN | ||
| Fuente de alimentación | |||
| Fuente de alimentación | 220V ± 10% 50Hz/60Hz ± 5% | ||
| El consumo de energía | ≤200VA | ||
| Condiciones generales | |||
| Ambiente de trabajo | Temperatura | 0℃ – 40℃ | |
| Humedad | ≤75% HR. | ||
| Seguridad y compatibilidad electromagnética | IEC61010-1:2001,IEC61326-2-1:2005 | ||
