- وصف
- سؤال
وصف
اختبار فرك التآكل الرطب
مقدمة: For the scrub resistance of wall paints and related products, operator should record the number of cycles to remove one continuous thin line of paint film across the 12.7mm(1/2 in.)width of the shim. But how to judge this 12.7mm length accurately? different operators always have their different judging standards. To accurately and quickly determine the end point of the test, it is not only necessary for the operator to have a preliminary prediction of the cycles of scrub resistance of the test samples, but also for them to be able to accurately identify the length of the removed paint film. لكن, it is quite difficult in actual operation.
BGD 526/S ultifunction Wet Abrasion Scrub Tester is equipped with the function of automatically identifying and calculating the length of the test sample from being abraded to the substrate (exposed bottom). It can monitor the wet abrasion scrub of the samples of two channels at the same time, no need to look at the sample on site. Once the exposed length of the test sample reaches the “threshold” set by the operator, the instrument will automatically stop and record the current scrub times, so as to truly achieve unattended. فضلاً عن ذلك, the operator can also browse the actual pictures of the test panel after scrubbing for any number of times, and can export the pictures to the U disk for checking.
اختبار فرك التآكل الرطب
سمات:
◆ Double working channel, each channel can measure the length of the exposed bottom visually. When it reaches the set threshold, it will stop automatically.
◆ Equipped with 8-inch touch screen, which can display clearly and run smoothly.
◆ متوافق مع مجموعة متنوعة من وسادات التآكل للتوافق مع متطلبات المعايير المختلفة, مثل ايزو, أستم, DIN etc.
◆ Quicly and easily to load and unload testing samples and replacing abrasion head.
◆ يمكن أن تعمل بشكل طبيعي تحت الجهد والتردد المختلفة.
◆ With the design of push rod, the running speed is stable and uniform.
◆ يتميز بوجود حاملي فرشاة للاختبار جنبًا إلى جنب.
◆ عمر خدمة طويل مع تصميم قوي ومتين.
◆ جسم الآلة بالكامل مصنوع من الألومنيوم المؤكسد, وجود حالة عمل مستقرة, نتائج الاختبار القابلة للتكرار, لا استثناء حتى في أسرع سرعة السكتة الدماغية.
◆ The solution (scrub medium) flows into the brush through the peristaltic pump on the side of the tester, and can be accurately controlled.
| Weight of brush | (450±10) ز |
| Speed | the setting range is (5~95) times/min, and the visual detection range is (5~60) times/min |
| Stroke length | 0~300mm (قابل للتعديل), can meet different test requirements |
| نطاق العد | 0~99,999 times |
| Glass plate size | 430mm×306mm |
| Capacity of liquid container | 1ل |
| قوة | AC 110V/220V, 50Hz/60Hz |
| الحجم الكلي (مم) | 590×460×720 |
| Net weight | 30 كلغ |
| معلومات الطلبية | BGD 526/S—Multifunction Wet Abrasion Scrub Tester With Image Recognition |










