وصف

اختبار نقطة الوميض في الكوب

BGD 240 Automatic Flash Point Tester is designed by rapid equilibrium closed cup method. It can rapidly test flash point of coating, طلاء (water-based paint), varnish, lacquer base, لاصق, solvent, Fatty acid methyl ester(FAME), chemical reagent, flavor, spices, solid chemical products, viscous chemical products, , air fuel oil, البترول والمنتجات ذات الصلة.

It conforms to ISO 3679,ايزو 3680,أستم د 3278,ASTM D3828 etc

الشخصيات
◆ Can detect the flash point at a specific temperature between -35 ⁄ و 100 ℃ (BGD 240/1)or RT to 300 ℃(BGD 240/2)at average rate heating.
◆ All functions are achieved through touch screen and digital display.
◆ Built in two test procedures:rapid balanced mode and average rate heating mode
◆ Various parameters, such as the heating mode, time, temperature and the average rate heating can be set by the user themselves.
◆ Planning board action, the decline of the ignition, the detection of flash point is done automatically.
◆ The gas ignition sources can be provided directly by the laboratory, you can also use the portable butane gas tank.
◆ Built-in cooling module is used to shorten the cooling time between the two tests.
◆ Amend barometric pressure automatically

Flash Point Temperature Range For BGD 240/1:-35℃ to 100℃;For BGD 240/2: RT to 300℃
Tested Flash Point Temperature Accuracy 0.5درجه مئوية
Sample Volume 2مل
Heating Rate Customize, quickest speed 5℃/min, longest duration 99min, highest temperature 100℃ (300℃)
Cooling Method Built-in cooling module (without external cooler 0℃~100℃)
واجهة الإخراج USB
مقاس 460mm×330mm×350mm
الوزن الصافي 8 كلغ
Operate Temperature 15℃~35℃
مزود الطاقة 220/240الخامس,50/60هرتز
Come with Accessories Steam source regulation component,Silicone tube,2ml injector,Thermometer 0~100℃,O-Type Seal Ring(5pcs)
الملحقات الاختيارية Special injector for high viscosity(thick)sample,Powdery object injector 4ml injector,Stand oil of Flash Point (49.7℃)
معلومات الطلبية BGD 240/1—Automatic Flash Point Tester(-35~100℃)

BGD 240/2—Automatic Flash Point Tester(RT~300℃)

اختبار نقطة الوميض في الكوب