- 描述
- 询问
描述
GA-3805 Solid Liquid Densimeter
介绍
The solid-liquid densitometer is used in the density test of rubber and plastic industry, 化学工业, powder metallurgy industry, food industry, powder industry and so on.The main representative products are rubber, 塑料, 粉状冶金, flavor and fragrance, chemical liquid, flux, ETC. Mdj-300m multifunctional density meter can realize the density test of solid liquid.
Test type: non-absorbent solid, 粘贴: such as rubber, 塑料, 珍珠棉, 合金, powder metallurgy finished products, compact ceramics, magnetic materials finished products, sealant, asphalt glue, gemstone, rock, PVC/PE/PP/ABS/PPS and other granule.
Various liquid densities and concentrations: 硫酸, sodium hydroxide, ethanol, 甲醇, potassium hydroxide, ETC.
测试 磷原则: it conforms to GB/T1033, GB/T2951, GB/T3850, GB/T533, GB/T208, GB/T5163, 国标/T 1933, GB/T4196, GB/T4123, 国标/T 611, GB/T11540, GB/T12206, GB/T5518 and other standard
GA-3805 Solid Liquid Densimeter
S规格
模型: GA-3805
Weighing range :0.005-300G
密度精度 :0.001 g/cm
Density range :0.001~99.999g/cm3
Solid mode: arbitrarily shaped solid block, granular body
Liquid mode: Any fluid can be measured
Principle of measurement: The principle of Archimedes permutation. The test time is about 5 秒
The results showed that the density and volume of solids;Liquid density, 专注 %, baume Be
Parameter setting: 坚硬的: water temperature setting, medium liquid density setting;Liquid: specific gravity hammer density setting, density upper and lower limits set
Correction mode: automatic correction with one key
输出方式 :RS-232C standard communication interface, convenient for test data output and printing
电源 :AC~220V / 50赫兹 (outlet power supply needs to be customized, and it can be noted before ordering)
GA-3805 Solid Liquid Densimeter
Solid measurement steps:
Put the product into the measuring table, measure the weight in the air, press ENTER to remember.
(2) Put the product into the water to measure the weight of the water, press ENTER to remember, display the density value.
GA-3805 Solid Liquid Densimeter
Liquid measurement steps:
(1) Place the beaker containing the sample on the measuring board and deduct the weight of the hook.
(2) Put the standard weight into the liquid to be measured with a hook and hang it on the measuring stand to display the density value.
