- 描述
- 询问
描述
GA-30035G触摸屏液体密度计
概括
Multi-function liquid densitometer in one step, 那是, instant display density values, in line with GB/T 611, GB/T11540, GB/T2206, GB/T5518… And other standard specifications. Xin Xiongfa density meter adopts modern electronic technology combined with Archimedes principle to directly read the density (specific gravity) value of various liquid solutions, which is one of the international general liquid density measurement methods, compared with the traditional Wechsler balance method and specific gravity bottle method, it has a relatively convenient operation. The upper and lower limits can be set to automatically determine whether the density is qualified or not, and alert; 测量不同液体时, different specific gravity hammer can be selected to test liquid fluidity, corrosive liquid, viscous liquid (粘贴), with Baume measurement function; Higher measurement accuracy, faster operation, suitable for continuous multiple tests
Suitable for measurement:
All kinds of chemical solutions, chemical additives, modern energy, petroleum fuels, scientific research chemicals, 化学试剂, pharmaceuticals, additives, 溶剂, 粘合剂, 油漆和涂料, 沥青, 化学油, 喝油, 食品添加剂, beverage beverages, 动物尿液, 动物血, fluid liquid, viscous liquid, volatile liquid, corrosive liquid, high temperature liquid, alcohol, flux, Essence, blood, glycerin, 氯化钠, electrolyte, 柴油机, refrigerant, dichloromethane, 硫酸… Liquid of similar state can be measured… Other fields
GA-30035G触摸屏液体密度计
主要特点:
1. The sensor imported from Germany is used to ensure the accuracy of the precision.
2. Only one step to directly read the density value, saving a lot of test time, with the Baume measurement function, can directly display the Baume
3. Easy to sample, the measured sample only needs about 50CC
4. The measuring cup is easy to clean, not limited by the small diameter of the specific gravity bottle, and can be used with other measuring cups of similar size.
5. It can measure the sample density at normal temperature to 100℃
6. Can test corrosive liquid, viscous liquid, strong acid and strong alkaline liquid (need to buy related liquid accessories)
7. Integrated stainless steel measuring hook, easy to install, 易于清洁
Product advantages:
1.5-inch touch screen operation, 易于操作, built-in guided test step prompts, simplify and speed up the operation process
2. Stmicroelectronics high-performance 32-bit ARM processor, processing power than the traditional instrument 100 times faster running accuracy, 高测量精度. For your every accurate measurement, escort.
3. Built-in large capacity rechargeable lithium battery, Tesla 18650 battery cell, independent battery protection circuit board, withstand pressure and fall
4. Germany imported HBM sensor 2uv resolution output, each factory equipment is strictly 48 小时 40 degrees high temperature aging test, weighing stability, accurate density value
5. Solution compensation setting, the use of water as the medium, can also use other liquid media
6. Intelligent Pinyin Chinese input, standard RS232 printer interface, print content can be freely edited. Supports ticket printing and label printing. Accurately record each of your measurements; Customize the print title and company information
7. Automatically save 100 sets of measurement data and perform statistical analysis on the data. Dynamic deletion, statistical printing, export to U disk accurately and quickly record your every time
范围：
| Brand | GONOAVA | ||
| 模型 | GA-30035G | GA-12031G | |
| weighing range | 0.005-300G | 0.001-120G | |
| 密度 | readability | 0.001 克/立方厘米 | 0.0001 克/立方厘米 |
| measuring table | Stainless steel test bracket | ||
| 范围 | Density > 1, < 1 can be tested【0.001g/cm3-7.800g/cm3】 | ||
| The type of measurement error | Any liquid that flows | ||
| result display | Density, Baume, relative density, 专注, average density, minimum density value, maximum density value | ||
| 测量原理 | Archimedes principle buoyancy method | ||
| measuring time | About 5s | ||
| viewing screen | 5 inch industrial touch screen | ||
| parameter determination | Specific gravity hammer density, weight setting, density upper and lower limit setting, concentration parameter setting, standard liquid density setting | ||
| data statistics | Automatically save 100 groups of density values, and automatically display the average value, Max value, Min value according to the number of saved groups | ||
| Correction mode | Single point automatic calibration, multi-point automatic calibration, pure water calibration | verification | ||
| 数据接口 | Standard RS-232 interface, can be customized USB interface | ||
| 可选配件 | Densitometer Thermal printer, multipoint calibration weight set, label printer, corrosion resistant liquid assembly, viscous liquid density assembly | ||
| 电源电压 | AC100V~240V 50HZ/60HZ | ||
| out packing size | Length 42.5cm x width 17.5cm x height 32.5cm | ||
