GA-B012 ASTM1149 Ozone Aging Test Chamber

① Test or storage of samples of flammable, explosive and volatile substances

② Testing or storage of corrosive substance samples

Testing or storage of biological samples

④ Testing or storage of samples of strong electromagnetic emission sources

5.2.测试方法

* In line with international standards of stainless steel test chamber and silent discharge to produce ozone fully closed gas loop, the entire ozone gas generation and capture are closed loop, to ensure personal safety.

* Set any ozone concentration in the range of 1000pphm.

* Speed regulating motor drives the sample rack device

(Meet the static tensile test, the specimen running track meets the cycloidal track principle)

* Ozone concentration automatic digital display control instrument.

* Dual beam “QUA” non-dispersive ultraviolet ozone detector.

* Digital display automatic online measurement.

* There is a metrological verification and correction interface.

* Ozone concentration/temperature and humidity setting value control PID self-tuning, easy to operate and reliable.

* 3rd generation Bill-Lambert measurement applications.

* Security door lock control system

(Measured in a soundproof chamber with a ring temperature of 25℃ and little echo; The average value of 8 points is tested using A weight. Each test point is 1 meter above the noise source and 1 meter above the ground.

JIS K 6259 ASTM1149 ISO1431 GB/T7762 GB/T13642 etc

② Inner wall material: mirror stainless steel plate SUS#304.

③ Box insulation material: 100mm high temperature resistant rigid polyurethane foam.

④ Door insulation material: 100mm high temperature resistant rigid polyurethane foam.

② Fan, heater, evaporator (and dehumidifier), drainage device, pressure balance port, adjustable air deflector, 温度传感器

② Flat embedded handle,

③ Door hinge :他们的 #304 inlet hinge

④ Energy-saving lamp in the box: LED light emitting mode

⑤ Lead hole: φ50mm 1 (和 1 rubber plug)

⑤ Ozone discharge outlet: φ50mm to outdoor

(2) Equipped with a safety door lock mechanism (can open the door in the test room), the door with electric heat anti-condensation, the viewing range of the hollow glass observation window is about (W200×H280mm), 总共 2. The door frame is equipped with anti-condensation electric heating device

① Thermal control mode: SSR (solid state relay) contact-free periodic pulse width adjustment

② Thermal power: about 2.5KW

1. 5.7 “True color touch thin screen

2. Two control methods: program/fixed value

3. 传感器类型: two PT100 inputs (optional electronic sensor input)

4. 输出方式: Voltage pulse (SSR)/Control output: 2 (temperature/humidity) /2 4-20mA analog output /16 relay output (passive)

5. Control signal: 8 IS control signal /8 T control signal /4 AL control signal

6. Alarm signal: 16 DI external obstacle alarm

7. The temperature measurement range: 90.00 ℃, 200.00 ℃, (选修的 – 90.00 ℃, 300.00 ℃) error of plus or minus 0.2 ℃;

8. Humidity measurement range: 1.0%–100%相对湿度, error ±1%RH;

9. Communication interface: (RS232/RS485, the longest communication distance is 1.2km[fiber up to 30km]);

10. Interface language type: 中文/英文

11. With Chinese input function;

12. Printer available (USB function optional);

13. A variety of signal combination relay output, signal can be logical operation (NOT,AND,OR,NOR,XOR),

PLC programming ability;

14. Relay control mode diversification: parameters -> Relay mode, relay -> Parameter mode, logical combination

Mode, composite signal mode;

15. Program editing: 120 groups of programs can be programmed, each group of programs can be programmed up to 100 段;

16. With network function, IP address can be set;

17. Remote control instrument;

18. The product display is clear and intuitive, the programmable control system is flexible and convenient to operate, 性能稳定, more efficient work;

规格:

尺寸: 205 × 146 ×43 (毫米) (length × width × depth)

Installation hole size: 172 × 133(毫米) (L × W)
TFT分辨率：800×480 64K色.

解决: Temperature ±0.01℃, humidity ±0.1%R.H.

Temperature slope :0.1 〜 9.9 可以设置.

With upper and lower limit standby and alarm function.

Temperature and humidity input force signal dry and wet ball PT100x2.

9 groups of P.I.D control parameter setting,P.I.D automatic calculation.

Dry and wet ball automatic correction screen

②BTC balanced temperature control mode +DCC intelligent cooling capacity control +DEC intelligent electrical control (temperature test equipment)

③BTHC balanced temperature and humidity control mode +DCC intelligent cold control +DEC intelligent electrical control (temperature and humidity test equipment)

The temperature setting (SV) is displayed directly with the actual (PV) 价值.

Can display the current execution program number, segment, remaining time and number of cycles.

Run cumulative time function.

The temperature program setting value is displayed by graphical curve, with real-time display program curve execution function.

With a separate program editing screen, each page can input at least 5 segments of temperature and humidity and time.

English and Chinese can be switched at will.

The fault prompt screen is displayed.

The screen can be backlit.

The screen display protection function can be used for timing, TIMER or manual shutdown Settings.

Available memory capacity: 12000 SEGMENTS.

Repeatable commands: Each command can be executed up to 3200 次.

The program is made in conversational style and has the functions of editing, clearing and inserting.

SEGMENTS is set to 0 to 99Hour59Min.

Programmable sequential control module device x2 group.

With power off program memory, automatically start and continue to execute the program function after the restart.

With RS-485 or RS-232 communication interface.

With USB interface function.

The graphic curve can be displayed in real time when the program is executed.

It has the function of automatically adjusting the freezing capacity.

It has the function of booking start and shutdown.

With date, time adjustment function.

Key and screen LOCK function.

Air conditioning channel limit overtemperature

Fan motor overheating

Leakage protection

Heating tube without air drying and burning protection

Overload and short circuit protection

Power-off protection

There is no strong vibration around the device

There is no strong electromagnetic field around the device

There are no inflammable, explosive, corrosive substances and dust around the equipment

Leave proper space for use and maintenance around the equipment, as shown in the following figure:

能量源

Power supply capacity

Maximum current

Power switch

Allowable voltage fluctuation range: 交流电 (220±10) V

Allowable frequency fluctuation range: (50±0.5) 赫兹

The grounding resistance of the PGND cable is less than 4 欧姆

用户需在安装现场为设备配置相应容量的空气或电源开关, and the switch must be independent for the device

About4.5 kW

25A

32Ａ(Plastic-case leakage protector)

When the ambient temperature is below 0 °C, the water remaining in the equipment should be discharged clean, so as not to freeze the water in the pipeline and damage the pipeline (except for air-cooled machines).