- 描述
- 询问
描述
GA-2001-B 门式恒温恒湿试验箱
1.规格
| 模型 | GA-2001-B |
| Up inner size | W400*H500*D400mm |
| Down inner size | W400*H500*D400mm |
| 外形尺寸 | W1000*H1720*D1500mm |
| 温度范围 | 0℃~150℃ |
| 湿度范围 | 20%~98%RH. |
| 内里材质 | SUS304不锈钢 |
| Out material | SUS304
Stainless steel or electrostatic spray painting |
| Cool system | French TECUMSEH double stage compressor |
| refrigerating fluid | R404a and R23(DUPONT) |
| Cooling way | Air cooled |
| 控制器 | Independently developed 7 inch full-color touch screen controller |
| 升温速率 | 2.0℃~4.0℃/min nonlinear |
| Cooling rate | 0.7℃~1.0℃/min nonlinear |
| 配件 | 50mm connection hole *1 放, wet gauze *1 放, 4GB usb disk (with operation video)*1 放, manual warranty card *1 放, and rack *2 件 |
| 重量(公斤) | 500 |
| 力量 | 380V3phase |
| Rate of (千瓦) | 6 |
| 当前的(A) | 15 |
GA-2001-B 门式恒温恒湿试验箱
2.技术规格
| 1. Equipment use | Equipment for testing the properties of materials in various environments and testing the heat, cold, dry and moisture resistance of various materials.It is suitable for testing quality of electronic, electrical, 手机, 沟通, instrument, vehicle, plastic products, 金属, 食物, chemistry, 建筑材料, medical and aerospace products. |
| 2. Test sample | This test equipment is prohibited:
Test or storage of samples of inflammable, explosive and volatile substances or of samples of stored corrosive substances or of stored biological samples or of samples of strong electromagnetic emission sources. |
| Equipment for testing the properties of materials in various environments and testing the heat
3. 磷表现 |
|
| 3.1. Test environmental conditions
3.2. 测试方法 |
Environment temperature is 25 ℃, relative humidity of 85% 或更少, test under the condition of no sample in the box
国标/T 5170.2 Temperature testing equipment 国标/T 5170.5 Wet and hot test equipment (wet and hot only) |
| 3.3. Temperature fluctuations | ±0.5℃ |
| 3.4. 温度偏差 | ±2.0℃ |
| 3.5. Humidity fluctuations | ±2.5％r.h. |
| 3.6. Humidity deviation | ±3.0%. |
| 3.7. load | The test space is no more than three quarters of the total space, no heating source。 |
| Meet the test standards
|
国杰B 150.3 High temperature test
GJB 150.4Low temperature test IEC68-2-1 Test A: cold IEC68-2-2 Test B: dry heat GB 11158《High temperature test box technical conditions》 GB10586-1《Technical conditions of wet and hot test box》 GB/T 2423.2《Basic environmental test procedures for electrical and electronic products B: high-temperature test methods》 GB/T 2423.3《Basic environmental test procedures for electrical and electronic products Ca: constant humidity and heat test method》
|
| GA-2001-B 门式恒温恒湿试验箱
4. Structural features |
|
| 4.1Insulation enclosure structure
|
Exterior wall material: high quality stainless steel 304 or electrostatic spray paint
Inner wall material: high quality stainless steel 304 Box insulation material: flame retardant and fireproof rigid polyurethane foaming Door insulation material: flame retardant and fireproof rigid polyurethane foaming. |
| 4.1. Air conditioning channel | Centrifugal fan:
Heater, evaporator, feed outlet, 温度传感器. |
| Standard configuration of test box | Visual window 280x380x40mm 3 layer vacuum layer;
Explosion-proof incoming handle; Box lighting:5瓦 Pin hole：φ50mm 1pcs; |
| 4.2. Door | Single door opening, left door opening, observation window W280xH380mm, lamp, window frame/door frame anti-condensation electrothermal device; |
| 4.3. The control panel | Controller display, sound and light alarm, running indicator light, power button switch, USB data download interface |
| 4.4. Machine room | Refrigeration unit, water pan, drain hole, ETC |
| 4.5. Distribution control cabinet | Distribution board, heat dissipation system |
| 4.6. The heater | High temperature insulating ceramic heating wire (fast heating speed, low inertia, ETC。) |
| 4.7. Heater | Steam humidifying system, through the air duct system circulation mode |
| 4.8. Power line hole and drain hole | It’s behind the device |
