- 描述
- 询问
描述
TCJ-II Impact Tester
Testing Standard
Comes complete with ISO 6272-1,ASTM D 2794.
TCJ-II Impact Tester
使用
Used for testing impact resistance of coatings on metal sub- strates.
In accordance with ISO standard, the test panel is fixed on the die using a clamping device, so that the panel surface outside the test area is not affected by the rapid deformation caused by the falling weight.
- Anodized guide tube with a scale in inches and mm
- Tolerance for ISO falling weights ± 1 G
- Maximum falling weight 2 公斤
- Exchangeable falling weights and dies
- Can be easily converted for testing in accordance with ASTM
The impact tester consists of a solid base stand with a guide tube support. The guide tube has a slot that directs a cylindrical weight that slides up and down with the use of a collar that fits into the weight.
Graduations are marked along the slot to facilitate reading where the weight is dropped.The base of the instrument includes a die support.
The weights have built-in steel balls that provide different geometrical configurations.It is important that the ball diameter fits into the die to prevent shear- ing the test samples at the inner rim of the die.
In order to limit the indentation depth of the falling weight, distance rings of different thickness can be fitted.Also, different weights can be used.
TCJ-II Impact Tester
技术数据
| Guide Tube Scales | 0-100厘米(0-40英寸) |
| ISO Falling Weight | 1韩国GS,20mm dia |
| Additional Weight | 1韩国GS |
| Dia for ISO | 27毫米 |
| ASTM Falling Weight | 2LBS,15.9mm diameter |
| Additional Weight | 2LBS |
| Dia for ASTM | 16.3毫米 |
| Distance Rings | 1毫米,2毫米,4毫米,5毫米 |
| 方面 | 300 X 300 X 1400 毫米 |
| 重量 | 20韩国GS |
ntil reaching the radius at which the film shows cracks
TCJ-II Impact Tester
订购 & Technical Specifications
| 货号. | 方面 | 净重 | Shipping weight |
| 2695 | 230×170×110 mm | 5.5 公斤 | 7.0 公斤 |
