- 描述
- 询问
描述
圆柱芯轴测试仪
标准
国际标准化组织 1519 – 2011 油漆和清漆–Bend test (圆柱形心轴)
圆柱芯轴测试仪
Bending coated sheet metal over a defined radius
is an indicator of the elongation and adhesion of a paint film at bending stress.
Pushen offers two types of mandrel bending testers,cylindrical mandrel and conical mandrel.
This is used for simple and quick testing of the flexibility of a coating by bending a coated panel
over a rod of known diameter and then examining the coating for caracking,剥落,or other damage.
1.Made of anodized aluminum
2.12 mandrels of stainless steel
3.Panels up to 50mm width can be tested
4.Rod dia sizes：2，3，4，5，6，8，10，12，16，20，25，36毫米
圆柱芯轴测试仪
程序
– Apply the paint film on sheet metal strips
– Coat and dry film carefully to ensure reproducible results
– For testing,uniformly bend the coated samples over the mandrels within 1-2 sec at 180 度
– Start with the largest radius,continued until reaching the radius at which the film shows cracks
圆柱芯轴测试仪
订购 & Technical Specifications
| 货号. | 方面 | 净重 | Shipping weight |
| 2695 | 230×170×110 mm | 5.5 公斤 | 7.0 公斤 |
