Тестер количества катушек CH1200
- Описание
- Расследование
Описание
Тестер количества катушек CH1200
Деталь продукта
CH1200 coil turns tester series can conveniently test the turns and DC resistance of various winding coils. This series of instruments is suitable for testing various types of winding coils such as motors, трансформаторы, generator windings and relay coils. The instrument has the characteristics of intelligence, novel appearance, high test accuracy, high speed and convenient use. It can greatly improve the test efficiency without calibration and range change.
Функции:
■ New improved circuit design,
■ Dual control by CPLD and MCU
■ Fast measurement, higher accuracy
■ The resistance is tested by quasi-four terminals.
■ Wide measuring range
Тестер количества катушек CH1200
Параметры
| модель | CH1201 | CH1201R | CH1200 | CH1200R |
| Test sensor specifications | Ф9.5 Ф6 Ф4 | |||
| Measured coil shape | Inner diameter > ф 4mm outer diameter < ＜120mm height < ＜110mm | |||
| Number of turns test range | 1 ~ 80000 laps | 1 ~ 30000 laps | ||
| Accuracy of lap number test | 1 ~ 300 циклы 0 циклы 300 ~ 500 циклы 1 cycle 500 ~ 20000 циклы 0.2% 20000 ~ 80000 циклы 0.5% | 1 ~ 500 циклы 1 cycle 500 ~ 30000 циклы 0.3% | ||
| Basic measuring speed of turns | Быстрый 3 раз/секунду | Медленный 1.5 раз/секунду | ||
| Resistance test range | НЕТ | 100uΩ～200КОм | НЕТ | 100uΩ～20КОм |
| Basic measuring speed of resistance | НЕТ | 5 раз/секунду | НЕТ | 3 раз/секунду |
| Resistance test accuracy | НЕТ | 0.20% | НЕТ | 0.20% |
| Режим диапазона | automatic selection | |||
| Режим отображения | 6-bit LED display | |||
| Signal selection | Открыть、фаза、mute optional | |||
| Размер (Ш×В×Г) | 335mm×320mm×290mm | |||
| масса | About 6Kg | |||
| Рабочая температура и влажность | 0℃～40℃，≤90% относительной влажности | |||
| требуемая мощность | 198-242VAC 47.5-52.5Hz | |||
| энергопотребление | ≤30VA | |||
| remarks | To ensure the measuring accuracy of the instrument, please use ф 9.5 sensor when the inner diameter of the tested coil is greater than 30mm. | |||
