- Descriere
- Anchetă
Descriere
VDT-S10 Cycle Drop Generator
Descriere produs
Voltage sags, short interruptions are caused by sudden changes in power grid, power facility failures or loads. In some cases there will be two or more consecutive rollovers or interrupts. The voltage change is caused by a continuous change in the load connected to the grid. If the EUT on the power supply voltage changes cannot respond in a timely manner, it may lead to failure. The voltage drop generator is used to evaluate the performance of electrical and electronic equipment when subjected to voltage sags, short interruptions, and voltage changes. Products fully meet the latest requirements of IEC/ EN 61000-4-11.
VDT-S10 Cycle Drop Generator
Caracteristici
- Fully Compliant with latest Standards IEC/ EN 61000-4-11
- Afișaj pentru panou de 7 ”ușor de 7”
- Susțineți mai multe limbi & facilitați utilizatorii
- Program de auto-testare a mediului încorporat
- Funcționare programabilă
- Pre-programmed IEC 61000-4-11 test settings
- interfata RS232, Operare de control pe PC & printable test report
- Comfortable use and convenient operation
VDT-S10 Cycle Drop Generator
Technical data
| Model | VDT S10 |
|
Voltaj |
1~80V |
|
Voltage variation range |
0~120% |
| Voltage change duration | 1~ 9999 half cycle |
| Switching phase | 0~ 359°synchronous, asynchronous, or automatic |
| Built-in standard test grade | 0, 40%, 70%, 80% |
| Jump time | 1μs~ 5μs |
| Voltage changes in the number of repeat | 1~ 9999 |
| Interval cycle of voltage variation | 1~ 9999 half cycle |
| Drop mode | Set at random |
| EUT capacity | 1 phase, 10A |
| Alimentare electrică | AC220V 50/60Hz |
| Temperatura ambientala | 15℃~ 35℃ |
