- Description
- Inquiry
Description
GA-MN60D Dual Purpose Gloss Meter
Introduction
The technical parameters of MN60-D mirror gloss meter conform to the national standard GB9754-88, GB9966.5 and international standard ISO2813. each
All the performance indexes meet the requirements of national JJG696-2002 (Calibration regulation of mirror gloss meter).
This product is suitable for the measurement of gloss of paint, paint, ink, plastic, stone, paper, tile, enamel and other flat products.
GA-MN60D Dual Purpose Gloss Meter
Feature
1. The small design can be put in the pocket, more convenient to carry, is the current domestic small volume, light weight gloss meter.
2. Ultra-power-saving design, using a No. 5 battery (rechargeable battery or alkaline battery can be used), you can operate. A new battery can last for 60 hours
On it, about ten thousand data points can be measured.
3. Special moisture-proof process allows you to rest assured that it can be used in a variety of harsh environments.
4. Immediately open and test, no waiting time, stable value, no drift, easy to quickly measure.
5. Long life light source, no need to replace.
6. The matching between the light source and the photoelectric conversion meets the SD65 (λ) ω condition.
Seven. Bluetooth BLE communication, can be connected with the mobile phone test, and the use of the machine is no different.
8. Adapt to MyGloss APP for Android phone to realize multi-functional data processing such as storage statistics.
GA-MN60D Dual Purpose Gloss Meter
Note:
1. Avoid direct light during use, otherwise the measurement accuracy will be affected.
2. The standard board of the instrument should be kept clean. Do not touch the surface with your fingers. If the surface is stained, it will lead to increased instrument error and inaccurate reading
Wipe with head paper or anhydrous ethanol.
3. Because of the high stability of the instrument, the instrument does not need to be calibrated frequently, it is recommended to re-calibrate once after continuous use for 2 hours.
4, the battery should be replaced in time, otherwise long-term storage, the old battery may flow out of waste liquid, causing damage to the instrument.
GA-MN60D Dual Purpose Gloss Meter
Parameter
| measuring range | 0~99.9Gs/100-1000Gs (Gloss unit) |
| stability | Less than ± 0.4Gs /30Min |
| indication error | 0-99.9<±1.5Gs/100-1000<±2Gs |
| working power supply | One 5 (AA) alkaline battery or rechargeable battery |
| working voltage | 0.8V~1.5V |
| Beam Angle | 60° |
| spot size | 11x22mm |
| Measuring port size | 14x28mm |
| service conditions | environment temperature :0℃~40℃ |
| Relative humidity: not more than 85% | |
| Main engine size | (L)114mm x (W)32mm x (H)64mm |
| Standard board box size | (length)67mm x (width)46mm x (thickness)13mm |
| Main engine weight | 300g |
| Standard box weight | 45g |
| Software adaptation | My Gloss APP: 2.0(Android 4.1 above) |











