TH2810D Digital Inductance Meter TH2811D
- 설명
- 문의
설명
Inductance Meter
특징
100헤르츠,120헤르츠,1kHz,10kHz 4 typical test frequencies
4.3 inch TFT liquid crystal display, 중국어와 영어
optional operation interface
6-digit reading resolution
Maximum test speed:12.5ms, support low frequency and high
속도:TX4+3ms
10 bins sorting, test sorting is more perfect
100 sets of LCRZ instrument setting files, 10 measurements
Soft power switch
Support 110V/220V two power supply voltages
10-point list sweep, support multi-frequency test sorting
Ultra-low signal source output offset (<100μV), meeting the
needs of large inductor, common mode choke inductor test
Super impact protection
Power on state lock button;
Empty fixture judgment
Data logging function
Screen capture function
Interface function, 타이밍, trigger delay, 등. are more complete
Inductance Meter
기술적인 매개변수
| 모델 | TH2810B+ |
| 기본 정확도 | 0.1% |
| Test Frequency | 100헤르츠,120헤르츠,1kHz,10kHz |
| Test Parameters | 엘, 씨, 아르 자형,지|, 디, 큐, 엑스, θd, θr, Vm, Im, % |
| V/I Monitor | 예 |
| AC Test Signal Level | 0.1Vrms,0.3Vrms,1Vrms |
| Signal Source Internal Resistance | 10오, 100오 |
| Test Terminal Configuration | 5-단말기 |
| 테스트 속도(ms/time) | Fast: 19ms; Medium:83ms; Slow: 333msF≤120Hz Fast :4XT+3ms |
| Zero Clearing | 열려 있는, Short, 짐 |
| List Sweep | 10-point list sweep; Each scan point can be individually sorted, support multi-frequency combined test sorting; Scanning test for frequency and AC voltage |
| EquivalentCircuit | Series, Parallel |
| Range Mode | AUTO, HOLD |
| 트리거 모드 | 내부, 외부, 수동, Bus |
| Average Times | 1-255 |
| Arithmetical Operation | Direct reading, ABS,% |
| Delay | Trigger delay, step delay: 0—60.000s, 1ms step |
| General Function | Series, parallel equivalent mode, 구경 측정: 개방 회로, 단락, range selection: 자동적 인, 수동, trigger mode: INT, MAN,EXT, BUS, keyboard lock function |
| 비교기 | 10 bins sorting,BIN1-BIN9,NG,AUX; Bin count function PASS, FALL front panel LED display |
| Nonvolatile Storage | 100 sets of LCRZ instrument setting files, 10 test results |
| External USB Storage | Instrument setting file, CSV data file |
| 모델 | TH2810D | TH2811D |
| Measurement Function | ||
| Test Parameter | L-Q, C-D, R-Q,지|-큐 | |
| 기본 정확도 | 0.1% | 0.2% |
| Equivalents Circuit | Series, parallel | |
| Mathematical Functions | Deviation and PercentDeviation | —— |
| Rang Mode | 자동, Hold | |
| 트리거 모드 | 내부, Manual andExternal | 내부 |
| Measurement Speed | Fast: 12, Med: 5.1, Slow: 2.5 (meas/ sec) | |
| Correction Function | Open/Short multi-frequency Zeroing | |
| Measurement Terminals | Five Terminals | |
| Test Signal | ||
| Test Frequency | 100헤르츠,120헤르츠,1kHz,10kHz,정확성 0.01% | |
| Operation Temperature & 습기 | 0° C – 40° C, ≤90%RH | |
| Power Requirements | 전압 | 99V – 121V, 198V – 242V |
| 빈도 | 47.5헤르츠 – 63헤르츠 | |
| 전력 소비 | ≤20 VA | |
| 치수 (W × H × d) | 270mmx130mmx300mm | |
| 무게 | 대략. 3.7킬로그램 | |
