GA-2004-A Industrial Oven

설명

GA-2004-A Industrial Oven

용도

This machine can provide a stable test space for pre-heating, drying, changes about physics and chemistry testing . It supplys precision temperature controllter with high stability of platinum resistance to temperature that makes temperature well-distribution.

GA-2004-A Industrial Oven

Structure And Size

1. 내부 크기: 450(너비) 엑스 400(깊이) 엑스 400(키)mm
2. External size: 720(wide) 엑스 580(deep) 엑스 990(높은)mm+110mm trundle, subject to the real object;
3. Operation panel: the control panel is above the machine (as shown);
4. Opening method: single door opens from right to left;
5. Viewable window: visible window on the door: 사양: W200*H250mm;
6. The inner material is: 430# mirror plate, 1.0두께 mm;
7. The outer material is: cold-rolled steel plate, 1.0두께 mm.
8. Interlayer: there are two inner layers, and two meshes;
9. Thermal insulation material: glass fiber rock wool, with good thermal insulation effect;
10. Sealing material: high-temperature foamed silica gel bar;
11. Install brake movable casters on the machine;
12. The overall structure is floor-type.

GA-2004-A Industrial Oven

온도 제어 system

1. The temperature control instrument is PID digital display instrument (taichung instrument in Taiwan), single-point temperature control, which can be automatically calculated, PV/SV simultaneously displayed, button setting;
2. Timer setting: ~에서 1 second to 9999 시간 (optional setting hours, minutes and seconds) when the temperature reaches time, when the heating current is stopped, and an alarm is prompted at the same time;
3. Temperature line (케이) 유형;
4. Signal output is 3-32v;
5. The heating controller is: solid relay SSR without contact;
6. Heating material: heat resistant tube;

7, temperature range: 50 ~ 300 ℃ adjustable, commonly used temperature within 260℃;

8, rate of temperature: 100 ℃ about 15 분

9, the control precision, ± 0.5 ℃;

10, display precision: 0.1 ℃

11, temperature deviation: 50-200 ℃ ±2.0 ℃, 201-300 ℃±3.0 ℃. (no-load test)

GA-2004-A Industrial Oven

Air supply system

1. Air supply mode: internal horizontal hot air circulation;
2. The motor is temperature-resistant special type, with motor power of 370W/220V;
3. The fan is 7.5-inch multi-wing turbine type;
4. The air inlet is on the right side of the machine and the air outlet is on the left side of the machine.

힘 에스upply Device

1. Voltage AC 220V single-phase 50HZ
2. Current 16A
3. 힘: 3.5kw

Safety protection system

1. Over-temperature protection system: when the temperature is out of control and the temperature is set beyond the over-temperature protection, the heating power supply will be automatically stopped to protect the safety of products and machines;
2. Circuit protection system: ground protection, rapid insurance, 등