GA-1002 Izod Impact Tester
- Descrizione
- Inchiesta
Descrizione
GA-1002 Izod Impact Tester
Norma di prova:
ISO180-2000 “plastica – Determinazione della resistenza all'impatto del raggio a sbalzo del materiale duro
GB/T1843-2008 “hard plastic cantilever beam impact test method”
JB/T8761-1998 Macchina di test di impatto del raggio a sbalzo in plastica,
ASTM D256-2010 “test method for determination of plastic the IZOD pendulum impact strength
GA-1002 Izod Impact Tester
Usi:
This impact tester is used to test impact toughness of hard plastic,GFPA,glass fiber reinforced plastics,ceramica, cast stone,electrical insulating materialand other non-metal material.It’s a ideal testing equipments in chemical industry,R＆D institution,quality controlling dept.
GA-1002 Izod Impact Tester
Character：
1,intelligent controller has high precision, and is equipped with LCD display, can be intuitive, accurate reading data
2,domestic first using carbon fiber beam (has applied for patent), the impact on the direction, improve the rigidity of materials, and will impact the quality of concentrated in the largest pendulum on the center of mass of truly no vibration impact test, and increase the service life.
3,imported high resolution digital encoder, Angle test precision is higher and more stable
4,aerodynamic impact hammer and imported ball bearing, greatly reduced the mechanical friction loss
5,automatically calculate the final result, test data can be stored and averaging 12 groups of data
6,can choose Chinese and English operation interface, test results can choose J/m, KJ / ㎡, kg – cm/cm, ft – ib/in etc.
7,built-in miniature printer test data.
Norma di prova:
ISO180-2000 “plastica – Determinazione della resistenza all'impatto del raggio a sbalzo del materiale duro
GB/T1843-2008 “hard plastic cantilever beam impact test method”
JB/T8761-1998 Macchina di test di impatto del raggio a sbalzo in plastica,
ASTM D256-2010 “test method for determination of plastic the IZOD pendulum impact strength
GA-1002 Izod Impact Tester
Specifiche
| impact speed | 3.5 m/s |
| pendulum energy | (5.5 D) 2.75 J, 5.5 J |
| pendulum Yang Angle | 150 ° |
| pendulum impact center to edge distance | 335 mm |
| impact the blade to the jaw plane distance | 22 mm |
| blade radius | R = 0.8 + / – 0.2 mm |
| supply voltage | AC220V plus or minus 10% 50 hz |
| Outside size | 560（Length）* 300（Width）* 840（Height）mm |
| Peso | 135kg |
Specifications choice
| Modello | GA-1002-5.5D | GA-1002-22D |
| Pendulum energy | 2.75J、5.5J | 11J、22J |
| Pendulum pre elevation | 150° | |
| Impact Speed | 3.5M/S | |
