Keterangan

Ohm Meter

Brief Introduction

AT2511 is the upgrade version of AT511A, is a resistance meter with high-cost performance and small volume, which can measure 10μΩ – 200kΩ, max reading 5000 dgt.It is quite suitable for resistance measurement under low power conditions or factory inspection and product sorting based on its sorting function.

 

Ohm Meter

Parameter Teknis

Spesifikasi

AT2511

AT511C (discontinued)

Parameter

DC resistance

Akurasi Dasar 0.2% 0.3%
Jarak pengukuran 10μΩ~200.0kW 0.1mW~50.00kW
Sumber Sinyal SAYA – Maks: < 100mA
Jangkauan Automatic and manual with 8 rentang Automatic and manual with 6 rentang
Kecepatan Lambat: 3 times/second; Cepat: 10 times/second
Result Display Menunjukkan
Max Reading 5000
Pengaturan Short-circuit Zero-Adjust for each range
Pembanding OFF, PASS, HIGH, LOW None
Beep OKE, Dari, OFF None
Test Lead 4 terminal shielding(2 check terminal and 2 driving terminal) and external shielding ground section
Yang lain LED display
Applications Small diameter coil (headset coil); resistance of sensor;

Resistance test of protective device; ordinary transformer, inductor, motor, deflection coil winding resistance; all kinds of contact resistance; welding point contact resistance; mental defect detection

Fitur Umum
Sumber Daya listrik Tegangan: 198V dan – 240V dan. Frekuensi: 50Hz. Kekuatan: Max 15VA. Optional 110VAC
Ukuran 220mm (Lebar)x85mm (Tinggi)x259mm (Kedalaman), 2kg
ORDERING INFORMATION
Tambahan ATL503: Kelvin test leads

AC power cord