TC-06 Thermal Diffusivity Tester
1
2

TC-06 Probador de difusividad térmica

Máquina de conductividad térmica DRX-II-300A Máquina de conductividad térmica DRX-II-300A
Instrumento de conductividad térmica de metal DRX-II-PS Instrumento de conductividad térmica de metal DRX-II-PS

Categoría:

Descripción

TC-06 Probador de difusividad térmica

Introducción

Este probador de conductividad térmica mide la conductividad térmica., difusividad térmica, and hot-melt of different materials by using heat flow method. Consulte la norma MIL-I-49456A. La conductividad térmica de los estándares de prueba de rendimiento de transferencia de calor de aislamiento eléctrico sólido delgado., ASTMD5470-06, ISO12987-2000 YS/T63.3-2006, for testing the thermal conductivity of metal, composite material, carbon materials, graphite sheet, thermal silicone grease etc.

The instrument consists of the upper probe and its power adjustment system, the lower probe and its constant temperature system, the sample hot and cold surface test system, etc..

TC-06 Probador de difusividad térmica

Principales parámetros técnicos.:

1, Tamaño de la muestra: diámetro 50, thickness 0-50mm

2, Thermal conductivity range: 2.0–200W/m.K, repetibilidad: ≤5%, reproducibilidad: ≤5%.

3, Upper probe: built-in heater, with Pt100 platinum resistance thermometer control its temperature at 60±0.1℃

4, Measuring head temperature control accuracy: ±0,1 ℃;

5, Upper probe display accuracy: ±0,01 ℃;

6, Lower probe accuracy: 0.001mV, using thermo heap method, the data is more accurate than a single sensor, mas estable, more in line with the measurement of heterogeneous materials;

7, Thermostat: baño de agua externo. The temperature of cooling water is controlled at 20±0.5℃.

8, Temperature measurement system: using differential thermo heap or Pt100 platinum resistance thermometer measurement sample cold and hot surface temperature difference, accurate to ±0.1.

9, Tiempo de medición 5 ~ 20 minutos;

10. Can be equipped with automatic preloading and manual preloading, constant pressure on the style contact surface.

11,Automatic thermal analysis and testing software is used to quickly and accurately analyze the parameters of the sample test process and output the report.

12, Environment temperature requirements: 10℃-25℃;

13. Fuente de alimentación: AC220V/50Hz, power is not greater than 1.5KW