- Descripción
- Consulta
Descripción
RLC Tester
Descripciones
AT2818 adopts true-color TFT-LCD and English operation interface (Chinese also available). AT2818 (Rev B2.0) has been upgraded into continuous frequency with the resolution of 0.001Hz.
Four parameters can be measured simultaneously by AT2818, Any parameters can be set arbitrarily. Both main & sub parameters can be displayed in 6 dgt after the improvement. AT2818 can not only scan 10 kinds of frequency or voltage level list, but also correct three groups of user frequency so as to improve the accuracy.
| ESPECIFICACIONES | |
|
AT2818 Precision LCR Meter |
|
| Parámetros |
Cs-R,Cs-D,Cp-Rp,Cp-D,Lp-Rp,Lp-Q,Ls-Rs,Ls-Q,Rs-Q,R-X,Z-θrad,Z-θdeg |
| Monitor Parameters |
z, D, q, tr, d, R, X, GRAMO, B, Y, Vacaciones, Iac, D, D% |
| Precisión básica | 0.05% ± 5 dgt |
| Frecuencia | 10Hz – 300kilociclos (frecuencia continua, frequency resolution 0.001Hz) |
| Mostrar Rango | l: 0.00001mH-999999H C: 0.00001pF – 999999mF R,z: 0.00001W. – 99.9999MW D, 0.00001 – 9.99999 q: 0.00001 – 99999.9 D%: -999999% – 999999%
q(grados): -179.999° -179.999° q(rad):-3.14159 – 3.14159 |
| Resistencia de la fuente | 30Oh, 50Oh, 100Oh |
| Rango |
Automático, Manual, and nominal, 9 rangos |
| Pantalla máx. | 6 digital, parámetro principal: 999999; subparámetro:999999; monitor parameter: 999999 |
| Nivel de señal |
0.01V – 2.00V (10mV Step) |
| Velocidad | 30t/s, 10t/s, 6 t/s, 3 t/s 1-256 veces el promedio está disponible |
| Comparador |
14-clasificación de contenedores, 10-Soy GD, 1-bin NG, 1-papelera auxiliar, 2-bin principle parameter NG; Count Function: máx. – 999999 |
| Prueba de lista |
10 medición de barrido de nivel y frecuencia de grupo |
| Ajustamiento |
Abierto & Short circuit sweep frequency reset, 3-point frequency reset and load calibration. |
| Archivos |
10 group files to save user’s setting, 1 group to save system data real-time |
| Interfaz | RS232C, ExHandler interface, standard configuration USB Disc interface (article 10000 datos) |
| Otros | LCR Automatic selection, keypad lock, SCPI instruction set, true-color TFT-LCD Display |
| CARACTERÍSTICAS GENERALES | |
| Fuente de alimentación |
Voltaje: 90VCA – 250VCA; Frecuencia: 50Hz-60Hz; Max Power: 20Virginia |
| Tamaño |
264milímetros (ancho)x107mm(altura)x350mm(profundidad); 4kg |
| INFORMACIÓN SOBRE PEDIDOS | |
| Accesorios | ATL501E Test cable
ATL508A SMD patch test clip ATL601 Test fixture ATL600 Short-circuit slice ATL108 RS232 Communication cable Cable de alimentación de CA |
| Opcional | ATL608 SMD patch clamp
ATL508 SMD patch test clip ATS2818 Data acquisition software |
