Medidor de microohmios Anbai AT2511
- Descripción
- Consulta
Descripción
Ohm Meter
Breve introducción
AT2511 is the upgrade version of AT511A, is a resistance meter with high-cost performance and small volume, which can measure 10μΩ – 200kΩ, max reading 5000 dgt.It is quite suitable for resistance measurement under low power conditions or factory inspection and product sorting based on its sorting function.
Ohm Meter
Parámetro técnico
| ESPECIFICACIONES | |||
|
AT2511 |
AT511C (discontinued) |
||
| Parámetro |
Resistencia a DC |
||
| Precisión básica | 0.2% | 0.3% | |
| Rango de medicion | 10mΩ~200.0kW | 0.1mW~50.00kW | |
| Fuente de señal | I – máx.: < 100mamá | ||
| Rango | Automático y manual con 8 rangos | Automático y manual con 6 rangos | |
| Velocidad | Lento: 3 veces/segundo; Rápido: 10 veces/segundo | ||
| Visualización de resultados | Espectáculo | ||
| Max Reading | 5000 | ||
| Ajustamiento | Short-circuit Zero-Adjust for each range | ||
| Comparador | OFF, APROBAR, ALTO, BAJO | Ninguno | |
| Beep | DE ACUERDO, de, OFF | Ninguno | |
| Test Lead | 4 terminal shielding(2 check terminal and 2 driving terminal) and external shielding ground section | ||
| Otros | LED display | ||
| Aplicaciones | Small diameter coil (headset coil); resistance of sensor;
Resistance test of protective device; ordinary transformer, inductor, motor, deflection coil winding resistance; all kinds of contact resistance; welding point contact resistance; mental defect detection |
||
| CARACTERÍSTICAS GENERALES | |||
| Fuente de alimentación | Voltaje: 198VCA – 240VCA. Frecuencia: 50Hz. Fuerza: Máximo 15VA. Optional 110VAC | ||
| Tamaño | 220milímetros (Ancho)x85mm (Altura)x259mm (Profundidad), 2kg | ||
| ORDERING INFORMATION | |||
| Accesorio | ATL503: Kelvin test leads
Cable de alimentación de CA |
||
