GA-2016 Rapid Temperature Change Thermal Cycle Test Chamber
- Beschreibung
- Anfrage
Beschreibung
Rapid Temperature Change Thermal Cycle Test Chamber
AAnwendung ICHntroduction:
This test chamber provides high temperature and low temperature simulation environment, to detect rubber, Plastik, electronic products before and after the test of the material and strength of the decay degree. The machine can also simulate the container environment, to detect rubber, plastic under high temperature and humidity, fading, shrinkage situation. Test the heat resistance, cold resistance, dry resistance and moisture resistance of various materials. Suitable for electronics, electrical appliances, Batterien, Universitäten, Forschungsinstitute, inspection and quarantine bureau, paper products, Essen, vehicles, auto parts, Metall, chemisch, building materials and other industries factory unit quality control testing.\
Rapid Temperature Change Thermal Cycle Test Chamber
Technisch PParameter
| Artikel | Introductions
|
| Name | Thermal Cycle test chamber |
| Modell | GA-2016 |
| Menge | 1PC |
| Brand | GONOAVA |
| Design standard
|
1. GB11158 Technical conditions of high-temperature test chamber
2.GB10589-89 Technical conditions of low temperature test chamber 3.GB10592-89 Technical conditions of high and low temperature test chamber 4.GB/T2423.1-2008 Low temperature test chamber test method 5.GB/T2423.2-2008 High temperature test chamber test method 6.GB/T2423.22-2002 Test method for temperature change 7.IEC60068-2-1.1990 Low temperature test chamber test method 8. IEC60068-2-2.1974 High temperature test chamber test method 9.GJB150.3 high-temperature test 10.GJB150.4 low temperature test |
| Descriptive use | This test chamber provides high temperature and low temperature simulation environment, to detect rubber, Plastik, electronic products before and after the test of the material and strength of the decay degree. The machine can also simulate the container environment, to detect rubber, plastic under high temperature and humidity, fading, shrinkage situation. Test the heat resistance and cold resistance of various materials. Suitable for electronics, electrical appliances, Batterien, Universitäten, Forschungsinstitute, inspection and quarantine bureau, paper products, Essen, vehicles, auto parts, Metall, chemisch, building materials and other industries factory unit quality control testing |
| Merkmal | Perfect shape design, High texture appearance, Low noise of equipment , einfache Bedienung, sicher und zuverlässig |
| Prohibited items of experimental equipment | 1.Flammable, explosive and volatile substance samples for testing or storage
2.Corrosive substance samples for testing or storage 3.Testing or storage of biological samples 4.Testing or storage of samples from strong electromagnetic emission sources |
| Dimensions of inner and outer boxes | Inner box size: (W * H * D)500mm*600mm*500mm
Outer box size: (W * H * D)1100×2000×15-0 mm |
| container volume
Kapazität
|
150L |
| Temperaturbereich | -50℃ ~ +200℃ |
| Control stability | temperature≤±0.5℃ |
| Equilibrium of distribution | temperature≤±2℃ |
| Heating up time | · linear temperature program
15℃/min（Linear no-load range：-40℃~+100℃） |
| Cooling time | Linear cooling 10℃/min
（Linear no-load range：+100℃~-40℃） |
| Temperature limit | maximum temperature +200℃；minimum temperature -50℃ |
| The box structure is introduced | The whole is divided into three combinations of laboratory, electric control cabinet and machine bin. The upper left side is the laboratory, which is composed of the inner chamber of the insulation layer. The single door type is different to the left. The electric control cabinet is located on the right side. The panel is mainly composed of temperature controller, switch press button and fault protection indicator light. The machine compartment is placed below the laboratory and is composed of accessories such as filter, solenoid valve, line part and compressor. |
| Shell material | Steel plate paint |
|
Interior material
|
SUS#304
· stainless steel plate
|
|
Rapid Temperature Change Thermal Cycle Test Chamber Insulation material
|
Polyurethane hard foam + glass wool |
| Stringency | Silicone foam pressed tight 1 strip |
| Commodity shelf | The box is equipped with 2 stainless steel shelves with adjustable height |
| Heater | Adopt Taiwan imported stainless steel fin type heat dispersing pipe type heating pipe |
| Pneumatic conveyor
|
motor Stainless steel extended shaft Multi – blade aluminum alloy wind turbine Special adjustable 100 page air supply circulation system |
| Door | Single door, double door, recessed no reaction flat handle
Triple vacuum glass enlarging window
|
| Foot stool | The bottom of the fuselage is equipped with polyurethane movable universal wheels 4PC |
| ·
Refrigeration system characteristics ·
|
Multi-stage automatic load capacity adjustment technology Compressor ~ Emerson brand fully enclosed compressor Condenser – fin type attached cooling fan Evaporator – fin type multi – stage automatic load capacity adjustment Expansion valve ~ European and American imported components Refrigerant ~ environmental protection type frozen snow Accessories ~ Desiccant, oil separator, snow seed window etc… |
| Steuermodus | Balanced temperature and humidity control system (BTHC), based on P.I.D. control SSR, the heating and humidification of the system is equal to the heat and humidity loss, so it can be used for a long time. |
Rapid Temperature Change Thermal Cycle Test Chamber
