GA-3428 Машина за изпитване на вибрационно износване

Описание

Vibration Wear Testing Machine

Кратко въведение:

NOKIA designated special mobile phone surface coating friction testing machine. Used to test the wear resistance of mobile phone case.

By putting the product into a special liquid mixed with colored stones and potions, vibration friction is carried out to test the abrasion resistance of the product.

Vibration Wear Testing Machine

Supporting auxiliary materials:

1. Green abrasive RKK 15P 25kg
2. Yellow abrasive grain RKF 10K 75kg
3. Test solution FC120 30kg

Vibration Wear Testing Machine

Treatment tank:

1.Special reinforcement made, stable, anti-vibration weldment

2.Annealed welding structure without stress

3.The bushings in the treatment tank are hot-cast polyurethane (a resin that varies widely in toughness and is used in strong chemical-resistant coatings, лепила, and foams)

4.Дебелина: 10мм

5.Slot size: depth: 180mm length: 530мм

The frame of the machine

6.Groove with support, stable weldment

7.The handling tank is located on the helical spring

Drive of machine

An electric motor located under the slot drives it

Мощност: 1×0.65KW

Скорост: 3000rpm

Vibration Wear Testing Machine

Part of switch

1.Combined open and close main switch

2.There is an on/off end button for processing speed

3.Overload protection for processing speed

4.Have a timer for processing time

5.There is a connection possibility to the measurement part

6.Triggered by the driver motor

7.Coloring: RAL 7032 pebbly grey

Standard operating voltage: 400/230 V.50HZ,3PH N/PE

Standard control voltage: 230v 50hz

Protection level: IP 54

Температура на околната среда: +5 ~ +40º C

The quantitative feeding rate can be stepless in the range of 0-4 l/h