TH2830 Capacitance Resistance Inductance Tester TH2832
- وصف
- سؤال
وصف
Resistance Tester
Brief Introduction
Adopting the latest technology & high density circuit design and concentrating the essence of LCR test, TH283X series is a new generation
compact LCR meter of low cost and high performance. Instead of traditional mechanical power switch, it adopts software control power
switch. The basic accuracy of 0.05% and good test stability can compare favourably with those high-end models. Being equipped with
4.3 inch TFT LCD Display and brand new interface system, TH283X series LCR meters possess elegant appearance and easy operation.
Also, being provided with various interfaces and good compatibility with SCPI commands, TH283X series LCR meters are convenient for
constituting all kinds of test system and satisfy various kinds of demands for inspection, production and scientific research.
Resistance Tester
Technical Parameter
| نموذج | TH2830 | |||
| Basic Measurement Accuracy (See Details in Technical Specification) | LCRZ | 0.05% | ||
| DCR | 0.1% | |||
| Calibration Condition | Warm up time: ≥ 30 دقائق; Environment temperature: 23±5ºC Signal level: 1Vrms; Corretion: after OPEN, SHORT Testing cable length: 0 م | |||
| Test Signal Frequency | 50Hz-100kHz, 34points 50Hz, 60هرتز, 75هرتز, 100هرتز, 120هرتز, 150هرتز, 200هرتز, 250هرتز, 300هرتز, 400هرتز, 500هرتز, 600هرتز, 750هرتز, 1كيلو هرتز, 1.2كيلو هرتز, 1.5كيلو هرتز, 2كيلو هرتز,2.5كيلو هرتز, 3كيلو هرتز, 4كيلو هرتز, 5كيلو هرتز, 6كيلو هرتز, 7.5كيلو هرتز, 10كيلو هرتز, 12كيلو هرتز, 15كيلو هرتز, 20كيلو هرتز, 25كيلو هرتز, 30كيلو هرتز, 40كيلو هرتز, 50كيلو هرتز, 60كيلو هرتز, 75كيلو هرتز, 100كيلو هرتز | |||
| Signal Source Output Impedance | Selectable 30Ω, 100أوه, ±1% @1kHz | |||
| AC Test Signal Level | Normal | 10mV—2Vrms | ||
| دقة: 10mV,دقة: 10% x setting voltage+2mV | ||||
| 100μA—20mArms | ||||
| دقة: 0.1أماه | ||||
| DCR test signal level | 1V DC | |||
| Test Parameters | |Z|,ي|, ج, ل, X, ب, ر, ز, د, Q, θ, DCR | |||
| DCR display range | 0.00001 Ω – 99.9999 مΩ | |||
| LCR Parameters Display Range | |Z|, ر, X0.00001Ω — 99.9999MΩ|ي|, ز, B0.00001μs — 99.9999sC0.00001pF — 9.99999FL0.00001μH — 99.9999kHD0.00001 — 9.99999Q0.00001 — 99999.9θ(DEG)-179.999º — 179.999ºθ(RAD)-3.14159 — 3.14159Δ%-999.999% — 999.999% | |||
| Display Digits | 6 | |||
| وقت القياس (≥10 kHz) | Fast: 75 meas/sec(13آنسة), Medium:11 meas/sec(90 آنسة), Slow: 2.7meas/sec(370 آنسة) | |||
| Equivalent Circuit | Serial, موازي | |||
| Range Mode | Auto, Hold | |||
| Trigger Mode | Internal, Manual, External, Bus | |||
| Average Time | 1–255 | |||
| Correction | Open, Short, Load | |||
| Math Operation | Direct reading, ΔABS, Δ% | |||
| Trigger Delay Time Setting | 0 – 60.000س, 1ms steps | |||
| Step Delay Time Setting | 0 – 60.000س, 1ms steps | |||
| List Sweep | ·10 points list sweep·Frequency, AC voltage/current, internal/ external bias voltage/ current can be swept.·Each sweep point can be sorted separately. | |||
| Comparator Function | 10 bins, BIN1–BIN9, NG, AUX | |||
| Bin count function | ||||
| PASS, FAIL LED display on front panel | ||||
| Built-in Storage | Internal 100 LCRZ instrument setting files, 201 times test results | |||
| USB Storage | Instrument setting files , measurement result CSV files, printed screen (GIF format) | |||
| واجهه المستخدم | Control Interface | HANDLER | ||
| Communication Interface | USB HOST, RS232C, RS485(option), GPIB(option) | |||
| Storage Interface | USB DEVICE (U-disk storage) | |||
Resistance Tester
