وصف

Ohm Meter

Brief Introduction

AT2511 is the upgrade version of AT511A, is a resistance meter with high-cost performance and small volume, which can measure 10μΩ – 200kΩ, max reading 5000 dgt.It is quite suitable for resistance measurement under low power conditions or factory inspection and product sorting based on its sorting function.

 

Ohm Meter

Technical Parameter

تحديد

AT2511

AT511C (discontinued)

المعلمة

DC resistance

Basic Accuracy 0.2% 0.3%
Measurement Range 10مΩ~200.0kW 0.1mW~50.00kW
Signal Source أنا – الأعلى: < 100أماه
يتراوح Automatic and manual with 8 ranges Automatic and manual with 6 ranges
Speed Slow: 3 times/second; Fast: 10 times/second
Result Display يعرض
Max Reading 5000
تعديل Short-circuit Zero-Adjust for each range
Comparator OFF, PASS, HIGH, LOW None
Beep OK, NG, OFF None
Test Lead 4 terminal shielding(2 check terminal and 2 driving terminal) and external shielding ground section
آحرون LED display
التطبيقات Small diameter coil (headset coil); resistance of sensor;

Resistance test of protective device; ordinary transformer, inductor, motor, deflection coil winding resistance; all kinds of contact resistance; welding point contact resistance; mental defect detection

GENERAL FEATURES
مزود الطاقة الجهد االكهربى: 198الخامس التيار المتردد – 240الخامس التيار المتردد. تكرار: 50هرتز. قوة: Max 15VA. Optional 110VAC
مقاس 220مم (عرض)x85mm (ارتفاع)x259mm (Depth), 2كلغ
ORDERING INFORMATION
Accessory ATL503: Kelvin test leads

AC power cord