GA-1001-C Electronic Loading Melt Flow Index Tester

Beskrywing

GA-1001-C Electronic Loading Melt Flow Index Tester

Standaard:

GB/T3682-2018,ISO1133-2011, ASTM D1238-13

GA-1001-C Electronic Loading Melt Flow Index Tester

Beskrywing:

This is for high-precision melt flow rate instrument tester, used for testing all kinds of plastic, resin in the state of viscous flow through a certain temperature and load, every 10 min module and melt flow rate through the standard port MFR/MVR value, it is suitable for high temperature of polycarbonate, aromatic sulfone, fluorine plastics, nylon engineering plastics, can also be applied to polyethylene (PE), polistireen (PS), polipropileen (PP), ABS resin, polyformaldehyde (POM), polycarbonate (PC) resin with lower melting temperature, such as plastic test, widely used in plastic production, plastiek produkte, petrochemical industry and related colleges and universities.

GA-1001-C Electronic Loading Melt Flow Index Tester

Produk Karakter:

Ø 1.More paragraphs (3) temperature control method, three groups of platinum resistance sensor, the three heating jacket separate temperature control, high accuracy intelligent PID control, ramp rate the heating speed is adjustable

Ø 2.Resolution temperature was 0.1 ℃, the temperature fluctuation of not more than 0.5 ℃ within 24 ure, the displacement sensor resolution is 0.001 mm.

Temperature and temperature protection device

Ø 3.Hand automatic cutting material, can be arbitrary set blanking time (0 ~ 999), blanking times (0 ~ 999)

Ø 4.Test can choose quality standard, or volume method, two test methods or simultaneously, and can calculate flow rate ratio.Both methods start testing when the piston rod moves to a certain location.

Ø 5.Can be set up in 240 sekondes (GB3682 regulations) material preheat second countdown, after the end of the countdown, farmar automatically loaded, loaded to interval start automatic cutting, can also set the American standard (ASTM) preheating time, ens.

Ø 6.Built-in many plastic material melt index test conditions, convenient customer used to be obtained at any time, reduce the tedious work, and storing the last test conditions and results

The internal microtyping machine is convenient for printing and testing data

Ø 7.High precision touch screen controller, 7 inch touch screen, can be stored and print test conditions and data recently, test print menu Settings include test time (the default), the material name, test conditions (temperatuur, weight weight, blanking intervals), test results data.

Ø 8.Reserved RS232 interface or USB interface to connect computers, can through the computer control instrument operation and to save test data transmission to the computer,

Ø 9.Can manually loading weight or by stepping motor drives the ball screw rotation in order to achieve the purpose of automatic control at the top of the load weight increase or decrease

Toetsmetodes:MFR +MVR Methods

Vertoonmodus:Engelse kleur raakskerm vertoon

GA-1001-C Electronic Loading Melt Flow Index Tester

Spesifikasie

Model	GA-1001-C
Vat parameters	Inner hole 9.550±0.005mm length 163mm
Pistons head parameters	Suierkop: 9.474±0,005 mm
Piston rod diameter	8.94mm
Mold length	8.000±0,025 mm
Mold nominal inner diameter	2.0955±0.0051mm
Half die length	4.000±0,025 mm
Half die nominal inner diameter	1.050±0,005 mm
Temperatuur parameter	Met intelligente temperatuurbeheerinstrument, met vier pare beduidende temperatuurinstellingsbeheer, PID-parameters kan outomaties ingestel word, presisie tot ± 0.1 graad Celsius
Temperatuurspeling	Room Temperature~500degree centigrade
Temperatuur fluktuasie	±0,2 ℃
Temperatuur eenvormigheid	±1℃
Temperatuur vertoon resolusie	0.1℃
Vertoon resolusie	0.1℃
Maksimum verbruik	< 600W
Tyd vertoon resolusie	0.1s
Gewig parameters is soos volg:
Gewig akkuraatheid	±0,5%
Basiese konfigurasie	A 0.325kg
	B 1.2kg
	C 2.16kg
	D 3.8kg
	E 5kg
	F 10kg
	G 12.5kg
	H 21.6kg
Posisiebespeuring
Lusafstand van op en af	30mm
Beheer akkuraatheid	± 0,1 mm
Toets vloeibeheer
Tye om die materiaal te sny	0~10 keer
Materiaal sny interval	0~999s(stel verwysingstabel 2)
Beheervloei bereik die vasgestelde temperatuur sonder wisselvalligheid
Vat temperatuur tyd	15 min.
Materiaal geïnstalleer word	1 min.
Materiaal monster temperatuur herstel tyd	4 min.
Wanneer binder gestel	1min
Uitsetmodus	Mikro-outomatiese drukuitvoer
Sny materiaal metodes	Die hand outomaties in een lyf gesny
Toetslading	Agt stelle gewigte
Krag	AC220V±10% 50/60HZ