GA-1001-B Touched Screen Melt Flow Index Tester
- Beskrywing
- Ondersoek
Beskrywing
GA-1001-B Touched Screen Melt Flow Index Tester
Standaard:
GB/T3682-2000 《Determination of melt flow rate and melt volume flow rate of thermoplastics》
ISO 1133：1997《Determination of melt flow rate and melt volume flow rate of thermoplastics》
ASTM D1238 《Standard Test Method for Determination of flow rate of Thermoplastic Melt by extruded plasticizer》
GA-1001-B Touched Screen Melt Flow Index Tester
Description:
Used for testing all kinds of plastic, resin in the state of viscous flow through a certain temperature and load, every 10 min module and melt flow rate through the standard port MFR value, it is suitable for high temperature of polycarbonate, aromatic sulfone, fluoor plastiek, nylon and other engineering plastics, can also be applied to polyethylene (PE), polistireen (PS), polipropileen (PP), ABS resin, polyformaldehyde (POM), polycarbonate (PC) resin with lower melting temperature, such as plastic test, widely used in plastic production, plastiek produkte, such as petroleum and chemical industry and related colleges and universities, scientific research units, and the commodity inspection department.
Toetsmetodes:MFR+MVR Methods
Vertoonmodus: 7-inch touch screen controller
Produk Karakter:
1.Engelse LCD Touched Screen.Ø
2.Hand and Automatic cutting material.
3.Dubbel temperatuurbeheerstelsel, temperatuurbeheer akkuraatheid is meer akkuraat, hoër verwarmingsdoeltreffendheid
4.Dubbel ingevoerde sensors, meer akkurate temperatuurgradiënt van bo na onder, onafhanklik gebruik kan word, en die dienslewe te verbeter.
5.Silinder vir invoer hartz-legerings-nitreringsbehandeling, opening vorm vir koolstof wolfram staal materiaal, materiële werklikheid.
6.Isolasie vate van sus304 vlekvrye staal materiaal vir die geheel, langtermyn hoë temperatuur roes nie.
7.Outomatiese berekening resultate, en druk.
8.Have USB connector,can connect computer.
GA-1001-B Touched Screen Melt Flow Index Tester
Spesifikasie
| Model | GA-1001-B |
| Loading Barrel parameters | Inner hole Φ9.550±0.025mm |
| Cylinder diameter | Φ2.095±0.005mm
|
| Uitlaat lengte | 8.000±0,025 mm |
| Temperatuurspeling | Room Temperature~450℃ |
| Temperatuur fluktuasie | ±0,2 ℃ |
| Temperatuur eenvormigheid | ±1℃ |
| Temperatuur vertoon resolusie | 0.1℃ |
| Vertoon resolusie | 0.1℃ |
| Tyd vertoon resolusie | 0.1s |
| Displacement accuracy | 0.001mm
|
| Volume timing accuracy | 0.001s
|
| Testing scope of mass method | 0.1-150g/10min
|
| Range of test results by volumetric method | 50-5000cm³/10min
|
| Gewig parameters is soos volg: | |
| Gewig akkuraatheid | ±0,5% |
| Basiese konfigurasie
|
A 0.325kg |
| B 1.2kg | |
| C 2.16kg | |
| D 3.8kg | |
| E 5kg | |
| F 10kg | |
| G 12.5kg | |
| H 21.6kg | |
| Posisiebespeuring | |
| Lusafstand van op en af | 30mm |
| Beheer akkuraatheid | ± 0,1 mm |
| Toets vloeibeheer | |
| Tye om die materiaal te sny | 0~10 keer |
| Materiaal sny interval | 0~999s(stel verwysingstabel 2) |
| Beheervloei bereik die vasgestelde temperatuur sonder wisselvalligheid | |
| Vat temperatuur tyd | 15 min. |
| Materiaal geïnstalleer word | 1 min. |
| Materiaal monster temperatuur herstel tyd | 4 min. |
| Wanneer binder gestel | 1min |
| Uitsetmodus | Mikro-outomatiese drukuitvoer |
| Sny materiaal metodes | Hand and Automatic Cut |
| Toetslading | Agt stelle gewigte |
| Krag | AC220V±10% 50/60HZ |
