GA-9005建筑材料试验箱

描述

GA-9005建筑材料试验箱

Applicable standard:

国际标准化组织 11925-2:2002 乙 “flammability test method for building materials”

设计标准: GB/ t8626-2007 flammability test methods for building materials

GA-9005建筑材料试验箱

Usage 范围

The combustibility test furnace of the building materials controlled by the touch screen adopts the stainless steel box. It is an upgraded product with touch screen control, controllable automatic lifting and lowering of samples, and advance and backward adjustment of Bunsen lamp on the basis of the old jck-2 product. It is a high-configuration testing instrument for burning grade of building materials produced in strict accordance with the provisions of national standard gb8626-2007.The combustibility test furnace of building materials is used to measure the combustibility of building products in normal combustion environment by direct impact of small flame on vertically placed samples.The flammability test furnace of building materials is used to determine the combustion performance of grade B building materials (IE. the determination of the combustion performance/flame retardant grade B of building materials) by means of Kleinbrenner principle of Germany and direct impact of small vertical flame.

GA-9005建筑材料试验箱

产品特点

1. In line with ergonomic operation design, all the tests are completed by touch screen operation, with high degree of automation, which can store the previous test results and review the previous test data;
2. Servo motor driving model frame can be controlled and lifted automatically;
3. Bunsen lamp can be adjusted back and forth;
4. mm stainless steel steel plate box;
5. double Angle observation and test of toughened Pyrex door, 双倍的 (with lock) is convenient and practical

6. High pressure automatic ignition, durable combustion;
7. Ignition source can automatically tilt 45 度;
8. Flame height is adjusted by precision control valve;
9. The sample rack can be moved up and down and back and forth;
10. Equipped with two kinds of sample clamps.
11. Flame measuring scale;
12. High degree of automation, accurate experimental data and easy operation;
13. 盒子尺寸: 835 X 400 x 815mm wide
14. 材料: 1.5mm stainless steel
15. The bottom of the box is a flat natural vent, which is composed of 5cm*5cm square vents (1.5mm thick steel vents with a height of 50mm) to keep the air flowing smoothly
16. Meticulous workmanship, really no soldering process
17. Touchedscreen:
18. 尺寸: 7 “effective display size 15.5cm long and 8.6cm wide;
19. 解决: 800*480
20. Communication interface RS232, 3.3v CMOS or TTL, serial port mode
21. 存储容量 :1G
22. Pure hardware FPGA drive display, “零” startup time, power can run
23. M3+FPGA architecture is adopted. M3 is responsible for instruction analysis, and FPGA focuses on TFT display
24. The main controller adopts a low-energy processor and automatically enters the energy-saving mode

GA-9005建筑材料试验箱

主要技术参数

1. 环境温度: 15 ℃ 至 25 ℃;
2. 相对湿度: 少于 85%;
3. Power supply voltage and power: 220V 50HZ 100W;
4. Gas source: commercial propane with a purity of not less than 95% can be replaced by liquefied petroleum gas in general test (users should provide their own gas source for transportation safety);
5. Bunsen burner applies flame for 15s to the pattern
6. Single-chip microcomputer control, 数字显示.
7. Burn aperture is Φ 0.17 毫米, Bunsen flame length of 20 毫米 + / – 2 毫米, burner can tilt 45 °.
8. Apply flame (1s-99s) to the sample, plus or minus 0.5s, and the accuracy can be adjusted arbitrarily, plus or minus 0.2s.
9. Combustible gas source: propane with a purity of more than 95%.