- 描述
- 询问
描述
GA-2001-D 程控恒温恒湿试验箱 1000L
设计标准:
| GB11158 | High Temperature Test Chamber Technical Condition |
| GB10589-89 | Low Temperature Test Chamber Technical Condition |
| GB10592-89 | High-low Temperature Test Chamber Technical Condition |
| GB/T10586-89 | Damp Heat Test Chamber Technical Condition |
| GB/T2423.1-2001 | Low Temperature Test Chamber Test Methods |
| GB/T2423.2-2001 | High Temperature Test Chamber Test Methods |
| GB/T2423.3-93 | Damp Heat Test Chamber Test Methods |
| GB/T2423.4-93 | Alternating Damp-Heat Test Methods |
| GB/T2423.22-2001 | Temperature Changing Test Methods |
| IEC60068-2-1.1990 | Low Temperature Test Chamber Test Methods |
| IEC60068-2-2.1974 | High Temperature Test Chamber Test Methods |
| GJB150.3 | High Temperature Test Methods |
| GJB150.4 | Low Temperature Test Methods |
| GJB150.9 | Damp Heat Test Methods |
GA-2001-D 程控恒温恒湿试验箱 1000L
用途:
This equipment can simulate different environment condition. It’s appropriate for testing material performance, such as resist heat, resist dry,resist humidity and resist cold. That can define performance of material.
GA-2001-D 程控恒温恒湿试验箱 1000L
规格
| 姓名 | Temperature humidity test chamber |
| 模型 | GA-2001-D |
| Meet test standard | 1.GB11158 high temperature test box technical conditions
2.Gb10589-89 technical conditions of low temperature test chamber 3.Gb10592-89 high and low temperature test chamber technical conditions 4.GB/ t10586-89 wet and heat test chamber technical conditions ⒌ GB/T2423.1-2008 test method for low temperature test chamber 6.Temperature test box test method 7.GB/T2423.3-2006 wet and heat test box test method ⒏ GB/T2423.4-2008 alternating hot and humid test method ⒐ GB/T2423.22-2002 temperature change test method ⒑ IEC60068-2-1.1990 – test method for low temperature test chamber ⒒ IEC60068-2-2.1974 – test method for high temperature test chamber ⒓ GJB150.3 high temperature test ⒔ GJB150.4 test at low temperature ⒕ GJB150.9 humid heat test 15. GB4706.1-2005 16. IEC60335 1:20-04
|
| Describe purpose | This test chamber provides high temperature, low temperature, high humidity, low humidity simulation environment, to test the rubber, 塑料, electronic products before and after the test material and strength reduction degree.The machine can also simulate the container environment to detect the fading and shrinkage of rubber and plastic under high temperature and humidity.Test heat, cold, dry and moisture resistance of various materials.Suitable for electronic, electrical, batteries, universities, research institutes, inspection and quarantine bureau, paper products, 食物, vehicles, 汽车零件, 金属, 化学, building materials and other industries factory unit quality control testing. |
| characteristics | Perfect shape design high texture appearance equipment noise small operation simple safe and reliable |
| Prohibited items of experimental equipment | 1. Test or store samples of inflammable, explosive and volatile substances
2. Corrosive material samples are tested or stored 3. Test or storage of biological samples 4. Test or storage of strong electromagnetic emission source samples |
| Inner chamber size | （W*H*D）1000mm*1000mm*1000mm |
| Out chamber size | （W*H*D）1520mm*1850mm*1480mm |
| Volume size | 1000L |
| 温度范围 | -40℃ ~ +150℃ |
| Humidity range | 20～98% R•H |
| Temperature and humidity control range |  |
| Control stability | Temperature ±0.5℃；Humidity ±2% |
| Distribution uniformity | Temperature ±2.0℃；Humidity ±3.0% |
| Heat time | average3℃~5℃/minute，Nonlinear heating |
| Cooling time | average0.7℃~1℃/minute，Nonlinear heating |
| Temperature limit | Max temperature +150℃；Min temperature -40℃ |
| Brief introduction to box structure | As a whole, it is divided into laboratory, electric control cabinet and machine warehouse. The upper left part is the laboratory, which is composed of the inner tank of the insulation layer.Electronic control cabinet is located on the right, the panel is mainly composed of temperature controller, switch press and fault protection indicator light;The engine compartment is located under the laboratory and consists of filters, solenoid valves, circuit parts, compressors and other accessories. |
| Shell material | Iron plate outside coating |
| Interior material | SUS#304Stainless steel plate; |
| Heat preservation material | Polyurethane rigid foam + 玻璃棉 |
| stringency | Silica gel foam tight 1pcs |
| shelf | The cabinet is provided with stainless steel shelving with adjustable height 2pcs |
| heater | Adopt stainless steel fin type heat pipe from Taiwan |
| 加湿器 | Split type humidifier design |
| Fan motor | The motor 1 件
Stainless steel extension shaft Multi – wing fan – blade aluminum alloy wind wheel Special adjustable 100 – page air supply circulation system
|
| Chamber door | Single door, double door, embedded non – reaction plane handle
Three layers of vacuum glass enlarge the window Electric automatic mist removal, LED lighting
|
| Water box | 1 pcsexternal removable water tank (易于清洁)
1 set of automatic water refill device Water shortage alarm device
|
| foot stool | Polyurethane movable universal wheels are installed at the bottom of the fuselage 4pcs |
| Characteristics of refrigeration system | Multi-stage automatic load capacity adjustment technology
Compressor ~ French “taikang” brand closed compressor Condenser – fin attached – stage cooling fan Evaporator – fin multi – stage automatic load capacity adjustment Expansion valve ~ European and American imported components Refrigerant ~ environmental frozen snow species Accessories ~ desiccant, oil separator, snow seed window… |
GA-2001-D 程控恒温恒湿试验箱 1000L
