GA-1802-B Cylindricity Measuring Instrument

描述

Principle of instrumental measurement

Using radius measurement method, workpiece rotation. High precision air floating spindle is used as reference. Using imported precision circular grating, precision inductance displacement sensor and computer components. Measure the Angle and radial displacement of the measured workpiece to ensure the accuracy of the angular displacement and radial value of the measured workpiece; The measurement software adopts CA system measurement software based on Chinese Windows operating system platform to complete data collection, data processing and printing.

Cylindricity Measuring Instrument

Measurement functions

Measuring function: cylindricity meter, roundness, straightness, coaxiality, concentricity, end runout, end runout, verticality, parallelism, flatness

Analysis functions: surface waviness, 频谱分析, wave height analysis, adjacent chip runout, segment difference

Roundness evaluation method (4 kinds) : minimum area method, least square method, minimum circumscribed circle method, maximum circumscribed circle

Roundness filtering method: 1, 1-500, 1-150, 1-50, 1-15, 15-500

Waviness filtering: 3-16, 3-17, 15-500, 17-100

Filtering form: Gaussian (ISO standard)

Cylindricity Measuring Instrument

Use requirement

Air compressor air source pressure: 0.45 ~ 0.80Mpa

Air compressor air source flow: ≥0.2m3/min

Power requirement: about 500W; Ac 220V±10%, 50赫兹

Environmental requirements: 温度: 10 ~ 30℃; 相对湿度: < 85%

There is no obvious vibration source at the installation site

Separate ground

Cylindricity Measuring Instrument

技术规格

物品		规格
测量范围	Max diameter	Ф400mm
	Min inner diameter	ф3mm
	Max height	550毫米
Accuracy of principal axis	radial error	±(0.025+5H/10000)微米
	axial error	±(0.025+6X/10000)微米
Parallelism between axis of rotation and z-axis guide rail		2μm/400mm（Busbar benchmark）
workbench	Mesa diameter	φ200mm
	swing diameter	Φ420mm
	load capacity	60公斤
	adjustment range	Adjustable eccentric±2mm ; Adjustable level±1°
	转速	0-12 rpm（adjustable）
Column	Straightness (narrow range)	0.5μm /100mm
	Straightness (full range)	0.8μm /400mm
horizontal arm	Horizontal travel distance	180毫米
	Move speed	0.5-6mm/s OR MANUAL
Sensor	中风	500微米 (Radius difference)
	解决	0.005微米
	Needle shape	Ruby ball probe（diameter 2mm）
	Sensor direction/adjustment Angle	either direction/±45°
data collection		Imports grating 14400 point/week
放大		Any to a maximum of 200,000 次

 

范围

（Product）				(Packing)				重量(Wt.kg)	Volume（CBM m³）
Lx	Ly	Lz	Wt(公斤)	Lx	Ly	Lz	Wt(公斤)
960	650	1550	240	1000	750	1650	50	290	1.23

Cylindricity Measuring Instrument

Principle of instrumental measurement

Using radius measurement method, workpiece rotation. High precision air floating spindle is used as reference. Using imported precision circular grating, precision inductance displacement sensor and computer components. Measure the Angle and radial displacement of the measured workpiece to ensure the accuracy of the angular displacement and radial value of the measured workpiece; The measurement software adopts CA system measurement software based on Chinese Windows operating system platform to complete data collection, data processing and printing.

Cylindricity Measuring Instrument

Measurement functions

Measuring function: cylindricity meter, roundness, straightness, coaxiality, concentricity, end runout, end runout, verticality, parallelism, flatness

Analysis functions: surface waviness, 频谱分析, wave height analysis, adjacent chip runout, segment difference

Roundness evaluation method (4 kinds) : minimum area method, least square method, minimum circumscribed circle method, maximum circumscribed circle

Roundness filtering method: 1, 1-500, 1-150, 1-50, 1-15, 15-500

Waviness filtering: 3-16, 3-17, 15-500, 17-100

Filtering form: Gaussian (ISO standard)

Use requirement

Air compressor air source pressure: 0.45 ~ 0.80Mpa

Air compressor air source flow: ≥0.2m3/min

Power requirement: about 500W; Ac 220V±10%, 50赫兹

Environmental requirements: 温度: 10 ~ 30℃; 相对湿度: < 85%

There is no obvious vibration source at the installation site

Separate ground

技术规格

物品		规格
测量范围	Max diameter	Ф400mm
	Min inner diameter	ф3mm
	Max height	550毫米
Accuracy of principal axis	radial error	±(0.025+5H/10000)微米
	axial error	±(0.025+6X/10000)微米
Parallelism between axis of rotation and z-axis guide rail		2μm/400mm（Busbar benchmark）
workbench	Mesa diameter	φ200mm
	swing diameter	Φ420mm
	load capacity	60公斤
	adjustment range	Adjustable eccentric±2mm ; Adjustable level±1°
	转速	0-12 rpm（adjustable）
Column	Straightness (narrow range)	0.5μm /100mm
	Straightness (full range)	0.8μm /400mm
horizontal arm	Horizontal travel distance	180毫米
	Move speed	0.5-6mm/s OR MANUAL
Sensor	中风	500微米 (Radius difference)
	解决	0.005微米
	Needle shape	Ruby ball probe（diameter 2mm）
	Sensor direction/adjustment Angle	either direction/±45°
data collection		Imports grating 14400 point/week
放大		Any to a maximum of 200,000 次

 

范围

（Product）				(Packing)				重量(Wt.kg)	Volume（CBM m³）
Lx	Ly	Lz	Wt(公斤)	Lx	Ly	Lz	Wt(公斤)
960	650	1550	240	1000	750	1650	50	290	1.23