- 描述
- 询问
描述
GA-1001-B触摸屏熔体流动指数测试仪
标准:
GB/T3682-2000 《Determination of melt flow rate and melt volume flow rate of thermoplastics》
国际标准化组织 1133：1997《Determination of melt flow rate and melt volume flow rate of thermoplastics》
ASTM D1238 《Standard Test Method for Determination of flow rate of Thermoplastic Melt by extruded plasticizer》
GA-1001-B触摸屏熔体流动指数测试仪
Description:
Used for testing all kinds of plastic, resin in the state of viscous flow through a certain temperature and load, every 10 min module and melt flow rate through the standard port MFR value, it is suitable for high temperature of polycarbonate, aromatic sulfone, 氟塑料, nylon and other engineering plastics, can also be applied to polyethylene (聚乙烯醇), 聚苯乙烯 (PS), 聚丙烯 (聚丙烯), ABS resin, polyformaldehyde (pom), polycarbonate (个人电脑) resin with lower melting temperature, such as plastic test, widely used in plastic production, plastic products, such as petroleum and chemical industry and related colleges and universities, 科研单位, and the commodity inspection department.
测试方法:MFR+MVR Methods
显示模式: 7-inch touch screen controller
产品角色:
1.英语LCD触摸屏幕
2.Hand and Automatic cutting material.
3.双温控制系统, 温度控制精度更准确, 较高的加热效率
4.双输入传感器, 从上到下更准确的温度梯度, 可以独立使用, 并改善服务寿命.
5.进口缸Hartz合金硝化处理, 碳钨钢材材料的开口模具, 物质现实.
6.SUS304不锈钢材料的绝缘桶全部, 长期高温不会生锈.
7.自动计算结果, 并打印.
8.Have USB connector,can connect computer.
GA-1001-B触摸屏熔体流动指数测试仪
规格
| 模型 | GA-1001-B |
| Loading Barrel parameters | Inner hole Φ9.550±0.025mm |
| Cylinder diameter | Φ2.095±0.005mm
|
| 出口长度 | 8.000±0.025mm |
| 温度范围 | Room Temperature~450℃ |
| 温度波动 | ±0.2℃ |
| 温度均匀性 | ±1℃ |
| 温度显示分辨率 | 0.1℃ |
| 显示分辨率 | 0.1℃ |
| 时间显示分辨率 | 0.1s |
| Displacement accuracy | 0.001毫米
|
| Volume timing accuracy | 0.001s
|
| Testing scope of mass method | 0.1-150g/10min
|
| Range of test results by volumetric method | 50-5000cm³/10min
|
| 重量参数如下: | |
| 体重准确性 | ±0.5% |
| 基本配置
|
0.325公斤 |
| B 1.2公斤 | |
| C 2.16公斤 | |
| D 3.8公斤 | |
| E 5kg | |
| F 10kg | |
| G 12.5kg | |
| H 21.6公斤 | |
| 位置检测 | |
| 循环距离上下 | 30毫米 |
| 控制精度 | ±0.1mm |
| 测试流控制 | |
| 切割材料的时间 | 0〜10次 |
| 材料切割间隔 | 0〜999S(设置参考表 2) |
| 控制流达到设定温度而没有波动性 | |
| 枪管温度时间 | 15 分钟. |
| 安装材料 | 1 分钟. |
| 材料样品温度恢复时间 | 4 分钟. |
| 当粘合剂设置时 | 1分钟 |
| 输出方式 | 微自动打印输出 |
| 切割材料方法 | Hand and Automatic Cut |
| 测试负载 | 八组重量 |
| 力量 | AC220V±10％50/60Hz |
