ASTM G6-07-2020 Standard Test Method for Wear Resistance of Pipe Coatings

意义和目的

5.1 This procedure defines a test method for comparing the relative wear resistance of pipe coatings.

5.2 Wear resistance can be used to specify a better coating thickness for candidate materials in the development and research work of studying new coating systems or methods and in quality control.

范围

1.1 This accelerated test method is a procedure to determine the relative wear resistance of steel pipe coating to coarse abrasive and water slurry. The method is applicable to the testing of all types of electrical insulating pipe coatings and tapes, including thermoplastics, 热固性, and asphalt materials.

1.2 Pipe coatings are generally not subject to the type of wear specified in this article.

ASTM G6-07-2020 Standard Test Method for Wear Resistance of Pipe Coatings

1.3 Zinc and other metal protective coatings can be visually compared, but not enough to meet the electrical requirements of the test method.

1.4 The value of three valid decimals reserved in the International System of Units shall prevail. 括号内的数值仅供参考.

1.5 本标准并非旨在解决所有安全问题, 如果有的话, 与其使用相关. 本标准的使用者有责任建立适当的安全机制, 健康和环境实践，并在使用前确定监管限制的适用性.

1.6 This international Standard has been developed in accordance with the internationally accepted standardization principles established in the decisions of the Technical Barriers to Trade (技术性贸易壁垒) Committee of the World Trade Organization on the Formulation of International standards, guidelines and recommended principles.