PM240-IV Digital grinding instrument

Sự miêu tả

PM240-IV Digital grinding instrument

1.Tổng quan về sản phẩm

The flat grinding instrument is an essential instrument in the national standard GB5211.19 “The Visual Comparison method for the determination of the relative coloring power and dilute color of coloring pigments”. This machine can be used as a special physical property testing instrument for pigments, coatings and ink industries. The whole machine has compact structure, simple appearance, easy rotation and load change, easy installation and disassembly of glass plate. Using microcomputer control, màn hình LCD, convenient parameter setting. When the input parameters are wrong, the controller will automatically display “invalid input”, which achieves the purpose of reliable control and simple operation. The operation adopts touch screen mode, and the display and operation are simple and clear. It is also applicable to GB/T5211-16, 21867.1, 21868.5. ISO 787-16, 787-17, 8780-5, 8781-1.

PM240-IV Digital grinding instrument

2. Các thông số kỹ thuật chính

1.Diameter of grinding disc: 240mm

2, load/weight weight: 43 kg/(1.75Kilôgam) 64 kg/(1.75kg×2) 100 Kilôgam (1.75kg×2+2.92)

3, điện áp cung cấp điện: 220 V. 50 Hz

4, glass plate speed: 75±5rpm

5, set times range: 1 ~ 9999, running times range 0 ~ 9999, cumulative times range 0 ~ 9999

6.External dimension 570×350×500mm (length × width × height)

7, weight 60kg

8, motor power 0.55kW

PM240-IV Digital grinding instrument

3.Operation steps

Put the quantitative sample and the blending agent on the lower grinding disk, mix it into pulp with the adjusting knife, then move the blended slurry to the center of the lower grinding disk, and put down the upper grinding disk, so that the positioning shaft core and the positioning block are connected, and then pull the eccentric handle down and hang the required weight.
Turn on the power switch.
Enter the operation interface:
Press the number box to set the required number. Confirm that the input is correct, please press the “Run” cái nút, the confirmation dialog box will pop up, and click “ĐƯỢC RỒI”. At this time, the relay will pull on and the motor will start to operate. Every turn, cái “running times” automatically add up to 1. When the number of running laps is the same as the set number of laps, the motor will automatically stop running, và “cumulative number” shows the cumulative number of running times. At this time, turn the eccentric handle, separate the upper and lower of the grinding disc, pull the positioning handle outward, and push up at the same time, open the upper grinding disc, and observe the sample.
If you want to run again according to the number of laps set last time, please press the “run” cái nút, and the confirmation dialog box will pop up, and click “ĐƯỢC RỒI”. At this time, the number of runs will automatically clear to zero and then the count will start. If the “reset icon” corresponding to the number of runs is pressed, cái “number of runs” counter will be automatically reset; According to the reset icon “Reset icon” corresponding to the cumulative number of times, cái “cumulative number” counter is reset.
Switch between Chinese and English:
If water cooling is required, connect the water nozzle of the grinding disc.
If you press the “run” cái nút, an alarm window will pop up. Please check whether the motor is running. If the motor is running, the sensor is faulty. Need to contact our company.

4. Matters needing attention

After each work, it is necessary to clean the upper and lower glass, pad the appropriate paper in the middle, and put down the upper grinding plate to avoid damage to the glass plate.
Do not switch the machine repeatedly without interruption to avoid damage to the machine.

3, do not grinding disc without material, so as not to damage the glass grinding instrument

5.After-sales service

If the product quality problem is raised within 7 days after the product is sold and the product is not damaged, our company is responsible for the unconditional free return and replacement;

2, this product national warranty, warranty period: 1 bảo hành năm;

During the warranty period, if there are product quality problems, free maintenance; Long-term technical support outside the warranty period;