Sự miêu tả

Máy phân tích hạt tán xạ LT2800

Bản tóm tắt

The LT2800 is a new generation of intelligent laser particle size analysis system developed based on years of scientific research, with several innovative and patented technologies, and no need to change lenses or use standard samples for calibration. The dual-light source system with a wavelength of 638nm and a maximum power of 20mW solid laser and a wavelength of 468nm and a power of 12mW solid blue light source has a measuring range of 0.01 micron để 2800 micron and a measuring speed of up to 20,000 lần mỗi giây, with extremely high sensitivity and reproducibility. Accurate and reliable results can be obtained for all types of samples, and an improved inversion algorithm is used to simulate the results of different instruments and methods.

 

Máy phân tích hạt tán xạ LT2800

Technical characteristics
◆ The instrument fully complies with ISO13320 particle size measurement technical standards
◆ Particle size range 0.01 micron – 2800 micron, single lens and no need to replace
◆ Particle size measurement accuracy is better than ±0.5%, repeatability is better than ±0.5%
◆ Integrated constant temperature system wavelength 638nm, the maximum power of 20mW solid laser and wavelength 468nm, the power of 12mW solid blue light source dual light source system, completely overcome the helium neon gas laser preheating time is long, short service life shortcomings
◆ Công nghệ theo dõi và ổn định năng lượng ánh sáng có độ nhạy cao
◆ The detector is equipped with non-uniform cross area compensation detector array and high sensitivity backscatter detection unit
◆ Optical fiber polarization space filter * with patented technology
◆ Measuring speed up to 20000 lần mỗi giây
◆ Adopt oblique measurement window to reduce the influence of total reflection on the result
◆ Intelligent automatic optical alignment
◆ Automatic correction function of anomalous change of diffraction airy spot
◆ Thuật toán đảo ngược được cải tiến, with the result simulation function of different instruments and methods
◆ Equipped with independent automatic sampling system, and with SOP control and sharing function
◆ Dual drive injection decentralized integration technology, circulation and mixing separate independent setting and control
◆ Liquid level automatic induction and continuous adjustable control, the volume of dispersed medium can be controlled by software adjustment
◆ The ultrasonic power of the sampler is 100 W, the ultrasonic power is continuously adjustable, and it has the function of low liquid level ultrasonic protection

 

Máy phân tích hạt tán xạ LT2800

Tham số

nguyên tắc đo lường Full range laser diffraction
mô hình quang học Lý thuyết Michelian hoàn chỉnh và lý thuyết Fraunhofer là tùy chọn
phạm vi kích thước hạt 0.01μm -2800μm, không cần thay ống kính
hệ thống phát hiện It includes a non-uniform cross area compensation detector array and a large Angle and backscatter detection system
phương pháp lấy mẫu A 638nm, 20mW solid laser with integrated thermostatic system and a 468nm solid blue light source with a maximum of 12mW
nguồn sáng 638Laser trạng thái rắn nm với hệ thống ổn nhiệt tích hợp, lên tới 20mW
Chế độ lọc không gian Công nghệ lọc phân cực không lỗ kim được cấp bằng sáng chế
tế bào đo Độ nghiêng song song
Hệ thống căn chỉnh quang học Thông minh hoàn toàn tự động
đo tốc độ Lên đến 20,000 lần mỗi giây
đo thời gian Giá trị điển hình nhỏ hơn 10 giây

 

mức độ chính xác Dv50 tốt hơn ±0,6% (NIST-Tiêu chuẩn latex có thể truy nguyên)
độ lặp lại Dv50 tốt hơn ±0,5% (NIST-Tiêu chuẩn latex có thể truy nguyên)
tia laser an toàn Lớp học 1 sản phẩm laser
cấu hình máy tính Bộ xử lý Intel i5, 4RAM GB, 250ổ cứng GB, chuột, bàn phím và màn hình rộng
giao diện máy tính USB2.0 trở lên
Nền tảng chạy phần mềm Windows7 trở lên Phiên bản chuyên nghiệp
vận hành Nhiệt độ xung quanh 5ºC-40ºC
Độ ẩm môi trường xung quanh hoạt động 10%-85% độ ẩm tương đối (không ngưng tụ)
yêu cầu năng lượng 110V-240V, 50HZ-60Hz, standard grounding
Trọng lượng hệ thống quang học 40KILÔGAM
Kích thước hệ thống quang học 980mm x290mm x350mm