GA-G103 Non-Methane Total Hydrocarbon Analyzer

Sự miêu tả

GA-G103 Non-Methane Total Hydrocarbon Analyzer

Giơi thiệu sản phẩm:

The GA-G103 Non-Methane Total Hydrocarbon Analyzer utilizes hydrogen flame ionization detection (FID) công nghệ, offering high sensitivity and excellent stability. It features multiple selectable measurement ranges, capable of measuring trace hydrocarbons in high-purity gases to LEL (Lower Explosive Limit) levels in various gases. It is suitable for real-time analysis of total hydrocarbon concentration and lower explosive limit (LEL) in various organic gases. Typical Application Areas:
> Total hydrocarbon measurement in industrial process gases
> Gas concentration monitoring at the inlet and outlet of exhaust gas treatment devices (RTO/RCO/incinerators, vân vân.)
> Real-time monitoring of total hydrocarbons in emission purification and chemical cleaning plants
> Monitoring of total hydrocarbon content in liquid oxygen of air separation units
> Real-time monitoring of organic compound concentration at the outlet of catalytic, biological, and activated carbon treatment devices
> Real-time monitoring of total hydrocarbons in crude coal gas conversion to clean gas
> Real-time monitoring of total hydrocarbons (or other organic compounds) in workshop, plant area, plant boundary, and ambient air
> Monitoring and early warning of organic compound leakage during production processes
> Real-time monitoring of total hydrocarbons in emission purification and chemical cleaning plants
> Monitoring of total hydrocarbon content in liquid oxygen of air separation units
> Monitoring and early warning of the lower explosive limit of solvent-saturated air

GA-G103 Non-Methane Total Hydrocarbon Analyzer

Tính năng sản phẩm:

> Fast response time: T90 < 2S, total response time < 5S
> Built-in heating pump, suitable for low-pressure sampling conditions
> The entire system is heated to prevent condensation and adsorption of organic compounds in the sample gas
> High measurement accuracy, better than 1% F.S.
> Can simultaneously output THC concentration and LEL value
> Built-in EPC flow control for stability
> Response factors for various hydrocarbons are close to 1, resulting in stable and high-precision measurements

GA-G103 Non-Methane Total Hydrocarbon Analyzer

Các thông số kỹ thuật:

> Measured components: Total hydrogen, non-methane total hydrocarbons, explosive limit (LEL)
> Detection range: THC: 0-50~100000 ppm; LEL: 0-100%
> Detection limit: 0.1 trang/phút
> Analyzer heating: 120℃~180℃
> Sampling flow rate: 0.5 SLM-1.5 SLM
> Độ lặp lại: ≤1%
> Response time: T90 < 2S, total response time < 5S
> Zero drift: ≤±2%F.S./24h
> Span drift: ≤±2%F.S./24h
> Linearity error: ≤±1%F.S Communication Protocol: Modbus communication protocol
Operating Environment: 5℃ ~40℃, 0~95% RH
Sample Gas Pressure: 80 kPa-110 kPa
Nguồn cấp: 220 VAC, 50Hz
Hydrogen: độ tinh khiết >99.99%, supplied from hydrogen cylinder or hydrogen generator, áp lực 0.4 MPa
Không khí: Clean air, hydrocarbon concentration ≤0.3 mg/m³, áp lực : 0.4 MPa
Driving Gas: Compressed air, free of water, dust, and oil, áp lực : 0.4 MPa
Calibration Gas: Methane/propane single or mixed calibration gas, 0.2 MPa
Instrument Power: Startup 500W, Running 150W
Instrument Dimensions: 500 × 482 (435) × 213 mm
Instrument Weight: 21 Kilôgam