- Sự miêu tả
- Cuộc điều tra
Sự miêu tả
Máy kiểm tra chà mài mòn ướt
According to ASTM D 2486 và ISO 11998.
Abrasion resistance is an important property for paint and coatings.
It’s also common for tile, flooring, furniture, wall coverings, shower stalls, and bath tubs.
The tester produces a repeatable, controlled condition to simulate everyday use or wear pattern.
With a flexible design to use brushes, sponges, abrasive pads, and sand paper to wear the surface.
Besides abrasion testing, washability tests can also be performed.
Stain resistance and detergent testing are additional uses for abrasion testers.
Máy kiểm tra chà mài mòn ướt
Đặc trưng
Reciprocating linear motion at 37 cycles per minute.
Constant speed control over 450mm travel.
For wet or dry abrasion testing.
Preset count-down counter with automatic shut off.
Heavy duty drive system for low maintenance and long life.
Utilizes brush, sponge, abrasive pads, and sand paper.
Máy kiểm tra chà mài mòn ướt
Dữ liệu kỹ thuật
| Brush Specification | Each 34X86mm base plate is covered with 45pcs Ф3 holes and the length of wool is 20mm |
| Scrub Rate | 37±1cpm |
| Chiều dài đột quỵ | 300mm |
| Abrasion Head Load | 450g±2g |
| Digital Counter | 5-chữ số |
| Kích thước | 580×480×300mm |
| Counter range | 99999lần |
| Test plate size | 430X150X3mm |
| Motor power | 25W |
| Quyền lực | 220V 50HZ |
| Kích thước bên ngoài | 580X420X280mm |
| Shipping Weight | 25KG |
Phụ kiện tùy chọn
| Tên | Accessories and spare parts |
| Pig hair brush | ASTM D 2486，kích cỡ：38×90mm |
| Scrubbing pad | ISO 11998，kích cỡ：38×90mm |
| Scrub piece | ASTM D 2486，100chiếc(provide 2pcs free) |
| Adjust parts | ASTM D 2486， connector consists of two brushes |
| Adjust parts | ISO 11998，connection consists of two scrub pads |
Basic equipment configuration:
washing machine
Stand for two brushes
Two pig brushes and connecting components
Submersible pump and liquid box
