Máy kiểm tra trục gá hình trụ GA-6004

Sự miêu tả

Cylindrical Mandrel Tester

Tiêu chuẩn

ISO 1519 – 2011 Sơn và vecni–Bend test (cylindrical mandrel)

Cylindrical Mandrel Tester

Bending coated sheet metal over a defined radius

is an indicator of the elongation and adhesion of a paint film at bending stress.

Pushen offers two types of mandrel bending testers,cylindrical mandrel and conical mandrel.

This is used for simple and quick testing of the flexibility of a coating by bending a coated panel

over a rod of known diameter and then examining the coating for caracking,bong tróc,or other damage.

1.Made of anodized aluminum

2.12 mandrels of stainless steel

3.Panels up to 50mm width can be tested

4.Rod dia sizes：2，3，4，5，6，8，10，12，16，20，25，36mm

Cylindrical Mandrel Tester

Thủ tục

– Apply the paint film on sheet metal strips

– Coat and dry film carefully to ensure reproducible results

– For testing,uniformly bend the coated samples over the mandrels within 1-2 sec at 180 độ

– Start with the largest radius,continued until reaching the radius at which the film shows cracks

Cylindrical Mandrel Tester

Đặt hàng & Thông số kỹ thuật

Cat.No.	Kích thước	Khối lượng tịnh	Trọng lượng vận chuyển
2695	230× 170 × 110 mm	5.5 Kilôgam	7.0 Kilôgam