GA-4012 TESTILE TERTER DASTILE TEAR

Sự miêu tả

Người kiểm tra nước mắt dệt kỹ thuật số

Tiêu chuẩn kiểm tra:

GB/T 7742 textile fabric bursting performance part 1: determination of the hydraulic method of bursting strength and expansion breaking expansions

ISO 13938.1, FZ/T 60019, FZ/T 01030, ASTM D3786, BS 4768, WOOLMARK TM 29,

WSP 30.1, JIS L 1018.6.17

Người kiểm tra nước mắt dệt kỹ thuật số

Scope of application :

It is a powerful, general instrument, through a wide range of redesigned, with a modern look and a series of new features, inherent flexibility to test a wide range of material category, including textiles, vải vóc, giấy, cardboard, plastics and medical products, vân vân.

Người kiểm tra nước mắt dệt kỹ thuật số

Device Characteristics :

1.Adopt hydraulic method to meet the new national standard.

2.Touch screen control, the interface is simple and easy to understand, easy to operate and intuitive, touch sensitive.

3.Pneumatic clamps, evenly divided, and adjustable clamp pressure to avoid slippage or damage, dễ sử dụng.

4.The test cover is high transparent plexiglass, with LED light illumination, which can clearly observe the sample experiment process.It absorbs the magnet

Installation, replacement and disassembly is convenient.

5.Automatic induction blasting system, sensitive and reliable.

6.Install the organic glass cover to prevent the entreners and use more safety.

7.Adopt ac servo drive system, synchronous belt wheel drive, low noise, wide range of speed adjustment and high accuracy of operation.

8.High speed AD and processor, high sampling frequency and high test accuracy.

9.Domestic only: steady expansion, áp lực , fixed expansion and timing of four test methods.

10.The instrument comes with a thermal printer to print the report directly, and supports the online work with professional computer software.

Người kiểm tra nước mắt dệt kỹ thuật số

Technical parameters :

1.Measurement range: (full range 1% ~ 100%)

Người mẫu	2. -2 Người mẫu	3. -10 người mẫu
Stroke	4. 2.00Mpa	5. 10.00Mpa
Minimum dividing value	6. 0.001Mpa	7. 0.003Mpa

2.Pressure accuracy: less than 0.2%FS

3.Expansion height accuracy: less than 0.2%FS

4. khu vực thử nghiệm: 7.3 cm2 Φ (7.3 mm), 10 cm2 Φ (35.7 mm), 50 cm2 (79.8 mm) Phi, 100 cm2 Φ (112.8 mm)

5.Maximum expansion: 75

6.Pressure rate: 20-600ml/min

7.Phương pháp kiểm tra: steady and burst, steady pressure, fixed expansion and timing of four test methods

8.Pressure units: kPa, kg/cm2, quán ba, lb/in2

9.Công suất: AC220V/50Hz power: 200W

10.Kích thước: 550 x 450 x 700mm

11.Cân nặng: 125Kilôgam