GA-1802-A Cylindricity Measuring Instrument

Sự miêu tả

Cylindricity Measuring Instrument

Principle of instrumental measurement

Using radius measurement method, workpiece rotation. High precision air floating spindle is used as reference. Using imported precision circular grating, precision inductance displacement sensor and computer components. Measure the Angle and radial displacement of the measured workpiece to ensure the accuracy of the angular displacement and radial value of the measured workpiece; The measurement software adopts CA system measurement software based on Chinese Windows operating system platform to complete data collection, data processing and printing.

Cylindricity Measuring Instrument

Measurement functions

Measuring function: cylindricity meter, roundness, straightness, coaxiality, concentricity, end runout, end runout, verticality, parallelism, flatness

Analysis functions: surface waviness, spectrum analysis, wave height analysis, adjacent chip runout, segment difference

Roundness evaluation method (4 kinds) : minimum area method, least square method, minimum circumscribed circle method, maximum circumscribed circle

Roundness filtering method: 1, 1-500, 1-150, 1-50, 1-15, 15-500

Waviness filtering: 3-16, 3-17, 15-500, 17-100

Filtering form: Gaussian (ISO standard)

Cylindricity Measuring Instrument

Use requirement

Air compressor air source pressure: 0.45 ~ 0.80Mpa

Air compressor air source flow: ≥0.2m3/min

Power requirement: about 500W; Ac 220V±10%, 50Hz

Environmental requirements: nhiệt độ: 10 ~ 30℃; Độ ẩm tương đối: < 85%

There is no obvious vibration source at the installation site

Separate ground

Cylindricity Measuring Instrument

Thông số kỹ thuật

Mục		Sự chỉ rõ
Phạm vi đo	Max diameter	ф300mm
	Min inner diameter	ф3mm
	Max height	420mm
Accuracy of principal axis	radial error	±(0.025+5H/10000)mm
	axial error	±(0.025+6X/10000)mm
Parallelism between axis of rotation and z-axis guide rail		2μm/300mm（Busbar benchmark）
workbench	Mesa diameter	φ160mm
	swing diameter	φ320mm
	load capacity	30Kilôgam
	adjustment range	Adjustable eccentric±2mm ; Adjustable level±1°
	tốc độ quay	0-12 rpm（adjustable）
Column	Straightness (narrow range)	0.5μm /100mm
	Straightness (full range)	0.8μm /300mm
horizontal arm	Horizontal travel distance	160mm
	Move speed	0.5-6mm/s OR MANUAL
Cảm biến	Stroke	500mm (Radius difference)
	nghị quyết	0.005mm
	Needle shape	Ruby ball probe（diameter 2mm）
	Sensor direction/adjustment Angle	either direction/±45°
data collection		Imports grating 7200point/week
magnification		Any to a maximum of 200,000 lần

 

Tham số

（Product）				(Packing)				Cân nặng(Wt.kg)	Volume（CBM m³）
Lx	Ly	Lz	Wt(Kilôgam)	Lx	Ly	Lz	Wt(Kilôgam)
960	650	1550	240	1000	750	1650	50	290	1.23