GA-1001-C Electronic Loading Melt Flow Index Tester

Sự miêu tả

GA-1001-C Electronic Loading Melt Flow Index Tester

Tiêu chuẩn:

GB/T3682-2018,ISO1133-2011, ASTM D1238-13

GA-1001-C Electronic Loading Melt Flow Index Tester

Discription:

This is for high-precision melt flow rate instrument tester, used for testing all kinds of plastic, resin in the state of viscous flow through a certain temperature and load, every 10 min module and melt flow rate through the standard port MFR/MVR value, it is suitable for high temperature of polycarbonate, aromatic sulfone, fluorine plastics, nylon engineering plastics, can also be applied to polyethylene (Thể dục), polystyrene (Tái bút), polypropylene (PP), ABS resin, polyformaldehyde (POM), polycarbonate (PC) resin with lower melting temperature, such as plastic test, widely used in plastic production, plastic products, petrochemical industry and related colleges and universities.

GA-1001-C Electronic Loading Melt Flow Index Tester

Product Character:

Ø 1.More paragraphs (3) temperature control method, three groups of platinum resistance sensor, the three heating jacket separate temperature control, high accuracy intelligent PID control, ramp rate the heating speed is adjustable

Ø 2.Resolution temperature was 0.1 oC, the temperature fluctuation of not more than 0.5 ℃ within 24 giờ, the displacement sensor resolution is 0.001 mm.

Temperature and temperature protection device

Ø 3.Hand automatic cutting material, can be arbitrary set blanking time (0 ~ 999), blanking times (0 ~ 999)

Ø 4.Test can choose quality standard, or volume method, two test methods or simultaneously, and can calculate flow rate ratio.Both methods start testing when the piston rod moves to a certain location.

Ø 5.Can be set up in 240 giây (GB3682 regulations) material preheat second countdown, after the end of the countdown, farmar automatically loaded, loaded to interval start automatic cutting, can also set the American standard (ASTM) thời gian làm nóng trước, vân vân.

Ø 6.Built-in many plastic material melt index test conditions, convenient customer used to be obtained at any time, reduce the tedious work, and storing the last test conditions and results

The internal microtyping machine is convenient for printing and testing data

Ø 7.High precision touch screen controller, 7 màn hình cảm ứng inch, can be stored and print test conditions and data recently, test print menu Settings include test time (the default), the material name, test conditions (nhiệt độ, weight weight, blanking intervals), test results data.

Ø 8.Reserved RS232 interface or USB interface to connect computers, can through the computer control instrument operation and to save test data transmission to the computer,

Ø 9.Can manually loading weight or by stepping motor drives the ball screw rotation in order to achieve the purpose of automatic control at the top of the load weight increase or decrease

Test Methods:MFR +MVR Methods

Display Mode:English color touch screen display

GA-1001-C Electronic Loading Melt Flow Index Tester

Sự chỉ rõ

Người mẫu	GA-1001-C
Barrel parameters	Inner hole 9.550±0.005mm length 163mm
Pistons head parameters	Piston head: 9.474±0.005mm
Piston rod diameter	8.94mm
Mold length	8.000±0.025mm
Mold nominal inner diameter	2.0955±0.0051mm
Half die length	4.000±0.025mm
Half die nominal inner diameter	1.050±0.005mm
Temperature parameter	With intelligent temperature control instrument, with four pairs of significant temperature setting control, PID parameters can be automatically set, precision up to ± 0.1 degree centigrade
Phạm vi nhiệt độ	Room Temperature~500degree centigrade
Temperature fluctuation	±0.2 ℃
Temperature uniformity	±1oC
Temperature display resolution	0.1oC
Display resolution	0.1oC
Maximum comsuption	< 600W
Time display resolution	0.1S
Weight parameters are as follows:
Weight accuracy	±0,5%
Basic configuration	A 0.325kg
	B 1.2kg
	C 2.16kg
	D 3.8kg
	E 5kg
	F 10kg
	G 12.5kg
	H 21.6kg
Position detection
Loop distance from up and down	30mm
Control precision	± 0.1mm
Test flow control
Times of cutting the material	0~10 times
Material cutting interval	0~999s(set reference Table 2)
Control flow reaches the set temperature without volatility
Barrel temperature time	15 Tối thiểu.
Material be installed	1 Tối thiểu.
Material sample temperature recovery time	4 Tối thiểu.
When binder set	1Tối thiểu
Output mode	Micro-automatic print output
Cut material methods	The hand automatic cut into one body
Test load	Eight sets of weights
Quyền lực	AC220V±10% 50/60HZ