GA-1001-A Melt Flow Index Tester

Sự miêu tả

GA-1001-A Melt Flow Index Tester

Tiêu chuẩn kiểm tra

GB/T3682-2018,ISO1133-2011, ASTM D1238

GA-1001-A Melt Flow Index Tester

Discription:

Melt flow rate testing instrument can be used for ABS, polystyrene, polyethylene, polypropylene, polyamide, fiber resin, acrylate, POM, fluorine plastic, polycarbonate and other plastic materials, the melt flow rate (MFR) or the melt volume flow rate (MVR) to be determined.

GA-1001-A Melt Flow Index Tester

Product Character:

1.English LCD Touched Screen.Ø

2.Hand automatic cutting material.

3.Double temperature control system, temperature control precision is more accurate, higher heating efficienc

4.Double imported sensors, more accurate temperature gradient from top to bottom, can be used independently, and improve the service life.

5.Cylinder for imports hartz alloying nitriding treatment, opening mould for carbon tungsten steel material, material reality.

6.Insulation barrels of sus304 stainless steel material for the whole, long-term high temperature does not rust.

7.Automatic calculation results, and print.

GA-1001-A Melt Flow Index Tester

Test Methods:MFR Methods

Display Mode:English color touch screen display

GA-1001-A Melt Flow Index Tester

Sự chỉ rõ

Người mẫu	GA-1001-A
Barrel parameters	Inner hole 9.550±0.005mm
Pistons parameters	Piston head: 9.474±0.005mm
Outlet length	8.000±0.025mm
Paramters	Extrusion hole 1=2.095±0.005mm
Temperature parameter	With intelligent temperature control instrument, with four pairs of significant temperature setting control, PID parameters can be automatically set, precision up to ± 0.1 degree centigrade
Phạm vi nhiệt độ	Room Temperature~450degree centigrade
Temperature fluctuation	±0.2 ℃
Temperature uniformity	±1oC
Temperature display resolution	0.1oC
Display resolution	0.1oC
Maximum comsuption	< 600W
Time display resolution	0.1S
Weight parameters are as follows:
Weight accuracy	±0,5%
Basic configuration	A 0.325kg
	B 1.2kg
	C 2.16kg
	D 3.8kg
	E 5kg
	F 10kg
	G 12.5kg
	H 21.6kg
Position detection
Loop distance from up and down	30mm
Control precision	± 0.1mm
Test flow control
Times of cutting the material	0~10 times
Material cutting interval	0~999s(set reference Table 2)
Control flow reaches the set temperature without volatility
Barrel temperature time	15 Tối thiểu.
Material be installed	1 Tối thiểu.
Material sample temperature recovery time	4 Tối thiểu.
When binder set	1Tối thiểu
Output mode	Micro-automatic print output
Cut material methods	The hand automatic cut into one body
Test load	Eight sets of weights
Quyền lực	AC220V±10% 50/60HZ