- Description
- Inquiry
Description
Inductance Meter
GA100/GA10 inductance meter is used for the test of Inductance. With standard Handler interface. GA100 series adopt high performance processor and Using 4.3 inches LCD TFT display, with better stability and new button design and easy to operate, isthe best choice for Inductance sorting.
Inductance Meter
| SPECIFICATIONS | |
|
GA100/GA10 Inductance Meter |
|
| Parameters | L, R, | Z|, Q, X |
| Basic Accuracy | 0.1% |
| Frequency | CKTL100:50Hz,60Hz,100Hz,120Hz,1KHz,10KHz,20KHz,40KHz,50KHz,100KHz
CKTL10:50Hz,60Hz,100Hz,120Hz,1KHz,10KHz |
| Display Range | Z,X,R:0.1mΩ~99.999MΩ
L:0.0001µH~9999.9H Q:0.0001~9999.9 Δ%:-999.99%~999.99% |
| Source Resistance | 30W, 100W |
| Range | Auto, Hold, Manual selection |
| Signal Level | 0.1V rms, 0.3V rms, 1V rms |
| Trigger Mode | INT, MAN, EXT, BUS |
| Speed | 30 t/s, 10 t/s, 3 t/s |
| Equivalent Circuit | In series and parallel |
| Result Display | Direct,Δ%,V/I (Measured voltage/current monitoring) |
| Adjustment | Open / short / shortcut |
| Comparator | 5-bin sorting |
| Interface | RS232C, USB HOST, HANDLER |
| Others | The software version of the instrument can be upgraded and updated by U disk. |
| GENERAL FEATURES | |
| Power supply | Voltage: 110V/220V; Frequency: 50Hz – 60Hz |
| Size and Weight | 265mm (W) *100mm (H) *340mm (L); 3.5kg |
| ORDERING INFORMATION | |
| Accessories | Kelvin Test clip; AC Power Cord |
| Optional | SMD patch test fixture; SMD patch test clip; Test fixture
Short-circuit slice; RS232 Communication cable |
