GH-I UV Paint Volatile Matter Tester

คำอธิบาย

GH-I UV Paint Volatile Matter Tester

ภาพรวม:
The equipment is used for the determination of volatiles content in UV-curable coatings and crosslinking of oligomers in UV-curable coatings.
Comply with GB/T 33374-2016, กิกะไบต์/ที 34675-2017, กิกะไบต์ 18581-2020, กิกะไบต์ 24409-2020, กิกะไบต์ 30981-2020, กิกะไบต์/ที 38597-2020 มาตรฐาน.

GH-I UV Paint Volatile Matter Tester

Operation summary:
1. Place the instrument on a stable workbench and place it smoothly. The instrument should be separated from the wall by at least 30cm.
2, put the power switch and light switch in the off position, and then plug in the power cord (located at the back of the chassis), turn on the power. (Socket high power three-pin socket)
3. Put the socket switch in the off position, and insert the power plug of the light source and fan into the power socket located at the back of the chassis.
4. Open the test chamber door and put in the test plate. The test plate should be placed on the shelf.
5. After completing the above preparatory work, close the warehouse door, turn on the power switch, and turn on the light source switch. Record the test time.
6, after the test, turn off the light source switch, turn off the power switch.
7. Open the door and take out the test plate. Pay attention to the high temperature of the test plate to prevent burns.
8. ในระหว่างการทดสอบ, if you need to get close to the test chamber, please wear goggles and long clothes to prevent UV light from burning your eyes and damaging your skin. If you need to open the bin door during the test, turn off the power supply.
9. Turn off the light source switch after the work stops, wait 5~10 minutes, and then turn on after cooling.

GH-I UV Paint Volatile Matter Tester

พารามิเตอร์