คำอธิบาย

Ohm Meter

แนะนำสั้น ๆ

AT2511 is the upgrade version of AT511A, is a resistance meter with high-cost performance and small volume, which can measure 10μΩ – 200kΩ, max reading 5000 dgt.It is quite suitable for resistance measurement under low power conditions or factory inspection and product sorting based on its sorting function.

 

Ohm Meter

พารามิเตอร์ทางเทคนิค

ข้อมูลจำเพาะ

AT2511

AT511C (discontinued)

พารามิเตอร์

ความต้านทานไฟฟ้ากระแสตรง

ความแม่นยำขั้นพื้นฐาน 0.2% 0.3%
ช่วงการวัด 10μΩ~200.0kW 0.1mW~50.00kW
แหล่งสัญญาณ I – สูงสุด: < 100มิลลิแอมป์
พิสัย อัตโนมัติและคู่มือด้วย 8 ช่วง อัตโนมัติและคู่มือด้วย 6 ช่วง
ความเร็ว ช้า: 3 ครั้ง/วินาที; เร็ว: 10 ครั้ง/วินาที
ผลการแสดงผล แสดง
Max Reading 5000
การปรับ Short-circuit Zero-Adjust for each range
เครื่องเปรียบเทียบ OFF, ผ่าน, HIGH, LOW ไม่มี
บี๊บ ตกลง, ของ, OFF ไม่มี
Test Lead 4 terminal shielding(2 check terminal and 2 driving terminal) and external shielding ground section
คนอื่น จอแสดงผลแอลอีดี
แอปพลิเคชัน Small diameter coil (headset coil); resistance of sensor;

Resistance test of protective device; ordinary transformer, inductor, เครื่องยนต์, deflection coil winding resistance; all kinds of contact resistance; welding point contact resistance; mental defect detection

คุณสมบัติทั่วไป
พาวเวอร์ซัพพลาย แรงดันไฟฟ้า: 198V และ – 240V และ. ความถี่: 50เฮิรตซ์. พลัง: สูงสุด 15va. Optional 110VAC
ขนาด 220มม (ความกว้าง)x85mm (ความสูง)x259mm (ความลึก), 2กิโลกรัม
ORDERING INFORMATION
อุปกรณ์เสริม ATL503: Kelvin test leads

สายไฟเอซี