ไอเอสโอ 3104-2020: Methods of test for petroleum and its products – Petroleum products – Transparent and opaque liquids – Determination of kinematic viscosity
คำนำ
ไอเอสโอ (องค์การระหว่างประเทศเพื่อการมาตรฐาน) เป็นพันธมิตรระดับโลกของหน่วยงานมาตรฐานแห่งชาติ (สมาชิกร่างกายของไอเอสโอ). การพัฒนามาตรฐานสากลมักดำเนินการผ่านคณะกรรมการด้านเทคนิคของไอเอสโอ. สถาบันสมาชิกแต่ละแห่งที่สนใจในเรื่องที่คณะกรรมการด้านเทคนิคได้รับการจัดตั้งขึ้นมีสิทธิ์ที่จะเป็นตัวแทนในคณะกรรมการ. รัฐบาลและองค์กรระหว่างประเทศที่ไม่ใช่ภาครัฐที่ประสานงานกับองค์กรมาตรฐานก็มีส่วนร่วมในงานนี้. ISO ทำงานอย่างใกล้ชิดกับ International Electrotechnical Commission (ไออีซี) ในทุกเรื่องของมาตรฐานไฟฟ้า.
The procedures used to develop this document as well as those used for further maintenance are described in Part 1 ของคำสั่ง ISO/IEC. โดยเฉพาะ, ควรให้ความสนใจกับเกณฑ์การอนุมัติที่แตกต่างกันที่จำเป็นสำหรับเอกสาร ISO ประเภทต่างๆ. This document has been drafted in accordance with the editorial rules of Part 2 ของคำสั่ง ISO/IEC (ดูที่ iso.org/directives).
โปรดทราบว่าเนื้อหาบางอย่างในเอกสารนี้อาจอยู่ภายใต้สิทธิบัตร. ISO จะไม่รับผิดชอบในการระบุสิทธิในสิทธิบัตรดังกล่าวบางส่วนหรือทั้งหมด. Details of any patent rights identified during the development of the document will be in the introduction and/or in the ISO list of patent claims received (see.iso.org/patents).
ไอเอสโอ 3104-2020: Methods of test for petroleum and its products – Petroleum products – Transparent and opaque liquids – Determination of kinematic viscosity
ชื่อทางการค้าใดๆ ที่ใช้ในเอกสารนี้จัดทำขึ้นเพื่อเป็นข้อมูลเพื่อความสะดวกของผู้ใช้และไม่ถือเป็นการรับรอง.
สมัครใจ, related standards and conformity assessment related ISO specific and express the meaning of terminology as well as in relevant ISO technical barriers to trade (จะแจ้งภายหลัง) ยึดมั่นในหลักการขององค์กรการค้าโลก (องค์การการค้าโลก) ข้อมูล, please refer to the iso.org/iso/foreword.html.
This document is prepared by Technical Committee ISO/TC 28, Petroleum and related products, fuels and lubricants of natural or synthetic origin.
The third edition cancels and replaces the second edition of the technical revision (ไอเอสโอ 3104:1994).
เมื่อเทียบกับฉบับที่แล้ว, the main changes are as follows:
– Accuracy data has been updated to all actual fuels in the market;
– Biodiesel (FAME) blends and paraffin diesel are included in the scope;
– Includes process description and permission for automation technology.
ข้อเสนอแนะหรือคำถามใดๆ เกี่ยวกับเอกสารนี้ควรถูกส่งไปยังหน่วยงานมาตรฐานแห่งชาติของผู้ใช้โดยตรง. A full list of these agencies can be found at iso.org/members.html.
ไอเอสโอ 3104-2020: Methods of test for petroleum and its products – Petroleum products – Transparent and opaque liquids – Determination of kinematic viscosity
การแนะนำ
Many petroleum products and some non-petroleum materials are used as lubricants, and the proper operation of the equipment depends on the proper viscosity of the liquid used. นอกจากนี้, the viscosity of many petroleum fuels is very important for estimating better storage, handling, and operating conditions. ดังนั้น, the importance of accurate measurement of viscosity for many product specifications cannot be overstated.
Warnings This document is not intended to address all safety concerns, ถ้ามี, ที่เกี่ยวข้องกับการใช้งาน. It is the responsibility of the user of this document to take appropriate steps to ensure the safety and health of personnel and to determine the applicability of any other restrictions before applying this document.
1 ขอบเขต
This document specifies procedure A for the use of a manual glass visvisometer and procedure B for the use of a glass capillary visvisometer in an automated assembly to determine the kinematic viscosity ν of transparent and opaque liquid petroleum products by measuring the time of a given volume of liquid in a gravimetrically overcalibrated glass capillary visvisometer. The dynamic viscosity η is obtained by multiplying the measured kinematic viscosity by the density ρ of the liquid. The test method covers kinematic viscosity ranging from 0.2 mm2/s to 300 000 mm2/s over a temperature range from -20 ° C ถึง +150 องศาเซลเซียส.
Note that the results obtained from this document depend on the behavior of the sample and are intended to be applied to liquids where shear stress and shear rate are proportional (Newtonian flow behavior). อย่างไรก็ตาม, if the viscosity varies significantly with the shear rate, different results can be obtained from viscometers with different capillary diameters. Program and precision values have been included for residual fuel oils, which in some cases exhibit non-Newtonian behavior.
ไอเอสโอ 3104-2020: Methods of test for petroleum and its products – Petroleum products – Transparent and opaque liquids – Determination of kinematic viscosity
2 การอ้างอิงเชิงบรรทัดฐาน
The following documents are referenced in the text in such a way that some or all of their contents constitute the requirements of this document. สำหรับการอ้างอิงลงวันที่, ใช้เฉพาะเวอร์ชันที่อ้างถึงเท่านั้น. สำหรับการอ้างอิงที่ไม่ระบุวันที่, the new version of the reference (รวมถึงการแก้ไขใดๆ) ใช้.
ไอเอสโอ 3105, glass capillary kinematic viscometers-Specifications and operating instructions
ไอเอสโอ 3696:1987, Analytical laboratory water use. ข้อมูลจำเพาะและวิธีการทดสอบ
ASTM E1137, Standard specification for Industrial Platinum Resistance Thermometers
ASTM E2877, Standard Guide for Digital Contact Thermometers
ไอเอสโอ 3104-2020: Methods of test for petroleum and its products – Petroleum products – Transparent and opaque liquids – Determination of kinematic viscosity
3 ข้อกำหนดและคำจำกัดความ
เพื่อวัตถุประสงค์ของเอกสารฉบับนี้, ใช้ข้อกำหนดและคำจำกัดความต่อไปนี้.
ISO และ IEC ดูแลรักษาฐานข้อมูลคำศัพท์เพื่อการกำหนดมาตรฐานตามที่อยู่ต่อไปนี้:
– ISO online browsing platform: ดูได้ที่ iso.org/obp
– IEC Electronic Encyclopedia: available at electropedia.org
3.1 Kinematic viscosity ν
The resistance of a fluid to flow under gravity
ข้อสังเกต 1: For a gravity flow at a given static pressure head, the pressure head of a liquid is proportional to its density ρ. For any particular viscometer, the flow time of a fixed volume of fluid is proportional to its kinematic viscosity, ν :
ν = η/ρ
บันทึก 2: where η is the dynamic viscosity coefficient.
3.2 Dynamic viscosity
Dynamic viscosity coefficient
Viscosity η
ไอเอสโอ 3104-2020: Methods of test for petroleum and its products – Petroleum products – Transparent and opaque liquids – Determination of kinematic viscosity
The ratio between the applied shear stress and the shear rate of the liquid
บันทึก 1: It is a measure of resistance to liquid flow or deformation.
ข้อสังเกต 2: The term dynamic viscosity is also used in different contexts to denote frequency-dependent quantities in which shear stress and shear rate have sinusoidal time dependence.
3.3 Density ρ
Mass per unit volume of material at a given temperature