TH2830 Capacitance Resistance Inductance Tester TH2832
- Opis
- Povpraševanje
Opis
Resistance Tester
Kratek uvod
Adopting the latest technology & high density circuit design and concentrating the essence of LCR test, TH283X series is a new generation
compact LCR meter of low cost and high performance. Instead of traditional mechanical power switch, it adopts software control power
switch. The basic accuracy of 0.05% and good test stability can compare favourably with those high-end models. Being equipped with
4.3 inch TFT LCD Display and brand new interface system, TH283X series LCR meters possess elegant appearance and easy operation.
Also, being provided with various interfaces and good compatibility with SCPI commands, TH283X series LCR meters are convenient for
constituting all kinds of test system and satisfy various kinds of demands for inspection, production and scientific research.
Resistance Tester
Tehnični parameter
| Model | TH2830 | |||
| Basic Measurement Accuracy (See Details in Technical Specification) | LCRZ | 0.05% | ||
| DCR | 0.1% | |||
| Calibration Condition | Warm up time: ≥ 30 minut; Environment temperature: 23±5ºC Signal level: 1Vrms; Corretion: after OPEN, SHORT Testing cable length: 0 m | |||
| Test Signal Frequency | 50Hz-100kHz, 34points 50Hz, 60Hz, 75Hz, 100Hz, 120Hz, 150Hz, 200Hz, 250Hz, 300Hz, 400Hz, 500Hz, 600Hz, 750Hz, 1kHz, 1.2kHz, 1.5kHz, 2kHz,2.5kHz, 3kHz, 4kHz, 5kHz, 6kHz, 7.5kHz, 10kHz, 12kHz, 15kHz, 20kHz, 25kHz, 30kHz, 40kHz, 50kHz, 60kHz, 75kHz, 100kHz | |||
| Signal Source Output Impedance | Selectable 30Ω, 100Oh, ±1% @1kHz | |||
| AC Test Signal Level | Normal | 10mV—2Vrms | ||
| Resolucija: 10mV,Natančnost: 10% x setting voltage+2mV | ||||
| 100μA—20mArms | ||||
| Resolucija: 0.1mA | ||||
| DCR test signal level | 1V DC | |||
| Test Parameters | |Z|,Y|, C, L, X, B, R, G, D, Q, θ, DCR | |||
| DCR display range | 0.00001 Ω – 99.9999 MΩ | |||
| LCR Parameters Display Range | |Z|, R, X0.00001Ω — 99.9999MΩ|Y|, G, B0.00001μs — 99.9999sC0.00001pF — 9.99999FL0.00001μH — 99.9999kHD0.00001 — 9.99999Q0.00001 — 99999.9θ(DEG)-179.999º — 179.999ºθ(RAD)-3.14159 — 3.14159Δ%-999.999% — 999.999% | |||
| Display Digits | 6 | |||
| Measurement Time (≥10 kHz) | hitro: 75 mer/sek(13ms), Medium:11 mer/sek(90 ms), počasi: 2.7mer/sek(370 ms) | |||
| Equivalent Circuit | Serial, Parallel | |||
| Način obsega | Avto, Hold | |||
| Način sprožitve | Interno, Ročno, Zunanji, Bus | |||
| Average Time | 1–255 | |||
| Popravek | Open, Short, obremenitev | |||
| Math Operation | Direct reading, ΔABS, D % | |||
| Trigger Delay Time Setting | 0 – 60.000s, 1ms steps | |||
| Step Delay Time Setting | 0 – 60.000s, 1ms steps | |||
| List Sweep | ·10 points list sweep·Frequency, AC voltage/current, internal/ external bias voltage/ current can be swept.·Each sweep point can be sorted separately. | |||
| Comparator Function | 10 zabojniki, BIN1–BIN9, NG, AUX | |||
| Bin count function | ||||
| PASS, FAIL LED display on front panel | ||||
| Built-in Storage | Interno 100 LCRZ instrument setting files, 201 times test results | |||
| USB Storage | Instrument setting files , measurement result CSV files, printed screen (GIF format) | |||
| Vmesnik | Control Interface | ROKAVNIK | ||
| Communication Interface | USB HOST, RS232C, RS485(option), GPIB(option) | |||
| Storage Interface | USB naprava (U-disk storage) | |||
Resistance Tester
