Stroj za natezno testiranje GA-2000S

Opis

Natezni testirni stroj

jaz.Main functions

This machine is suitable for rubber, tire, hose, trak, sole, plastika, film, akril, FRP, ABS, EVA, PU, aluminum-plastic pipe, composite material, waterproof material, fiber, tekstilni, žica in kabel, papir, gold foil, trak, svila, spring, les, medical packaging materials, tape and other stretching, stiskanje, trganje, odstranjevanje (90 degrees and 180 degrees Can) and other mechanical properties test and analysis.

This machine is a new type of material testing machine combined with electronic technology and mechanical transmission, the load, deformation, displacement measurement and control has a high accuracy and sensitivity, the series of models using a single space structure, test space in the next space, mainly suitable for test load less than 5kN metal, non-metal material test, with stress, strain, displacement control mode. The maximum force, natezna trdnost, bending strength, tlačna trdnost, Elastični modul, raztezek pri pretrganju, yield strength and other parameters can be calculated.

Natezni testirni stroj

II.Introduction of control software

• Jezik operacijskega sistema programske opreme: Simplified Chinese/English.
• Force unit: N, KN, Kgf, Lbf, length unit: mm, cm, v prosto se lahko prosto pretvori;
• Automatic return to zero: the measuring system will automatically return to zero when the computer receives the test start instruction;
• Način prikaza: data and curve dynamic display with the test process;
• Result reproduction: the test results can be accessed at will, and the data curve can be re-analyzed;
• Result comparison: Multiple test characteristic curves can be superposition, reproduced, enlarged and presented in different colors for analysis and comparison of a group of samples;
• Emergency stop: equipped with emergency stop switch, used to cut off the power supply of the machine in emergency;
• Nadzorni način:
• Computer software to set speed, set load break (rupture), Čas izvajanja in druge metode nadzora

u ·automatically determines material fracture, drobljenje, itd., and automatically stops, and can be set to automatically return

• Type of curve:

u ·load-displacement, čas obremenitve, čas premika.

u ·stress-strain, čas napetosti, čas stresa.

u ·Navpične in vodoravne koordinate krivulje lahko nastavite poljubno.

• Available test information:

u ·Največja moč, minimalna moč, breaking value, Zgornja in spodnja trdnost donosa, natezna trdnost, tlačna trdnost, Elastični modul, raztezek, maksimum, minimalna vrednost, average value of stripping interval, itd. S preobremenitvijo, nadtok, prenapetost, podnapetost, prekoračitev hitrosti, možganska kap in druga večkratna zaščita.

u ·The data results are exported in the crystal report format currently accepted by the national standard.

Natezni testirni stroj

III.Tehnični parameter

Capacity selection	KN 10KN 20KN Optional, American brand high precision load unit
Precision class	Raven 0.5
Effective force measurement range	0.4％～100％
accuracy of force measurement	Within ± 0.5% of the indicated value
Testing machine resolution	The maximum load is 1/± 250,000 yards, the internal and external files are not divided, and the whole resolution is unchanged
Load sensor	Basic configuration: Tension and pressure sensor (maximum load)
Effective test width	400mm
Effective stretching space	More than 1400mm (without fixture) (more than 500mm inside the box)
Razpon testne hitrosti	0～500mm/min
Displacement measurement accuracy	Within ± 0.5% of the indicated value
Test bench safety device	Electronic limit protection
Test bench return function	Manual or automatic options, after the end of the test automatically or manually return to the initial position of the test
Overload protection	Over 10% of the maximum load, the machine automatically protects
Fixture configuration	Stripping fixture set
Main engine size	800×500×2500mm
Electric machine	220V±10% 0.4KW Japan Tama River servo motor
Driving mechanism	High precision ball screw
Teža glavnega motorja	(O tem) 460 Kg