BGD 930 Tester površinske hrapavosti
- Opis
- Povpraševanje
Opis
BGD 930 Tester površinske hrapavosti
Tester površinske hrapavosti is widely used in production site to measure surface roughness of various machinery-processed parts, calculate corresponding and clearly display all measurement parameters。
| Specifikacije | Informacije o naročanju | ||
| BGD 930 | BGD 931 | ||
| Standardno | ISO4287,DIN4768,JIS B,ANSI 146.1 | ||
| Merilno območje | Ra | 0.005～16μm/1.000～629.9μinch | 0.050～10μm/1.000～400.0μinch |
| Rq | 0.005～16μm/1.000～629.9μinch | —- | |
| Rz | 0.020～160μm/0.780～6299μinch | 0.020～100μm/0.780～4000μinch | |
| Rt | 0.020～160μm/0.780～6299μinch | —- | |
| Natančnost | ≤±10% | ||
| Resolucija | 0.001μm（reading＜10μm） | ||
| 0.01μm（10μm≤reading＜100μm） | |||
| 0.1μm（reading ≥100μm） | |||
| Fluctuation of display value | ≤6% | ||
| Profile digital filter | Filtered profile | Rc,PC-RC,GAUSS | —– |
| Non- filtered profile | D-p | —– | |
| Senzor | Radius | 5μm | 10μm |
| Material | Diamant | Diamant | |
| Merilna sila | 4mN（0.4gf） | 16mN（1.6gf） | |
| Probe angle | 90° | 90° | |
| Vertical radius of guiding head |
48mm | 48mm | |
| Maximum driving stroke | 17.5mm/0.75inch | ||
| Cutoff length | 0.25mm,0.8mm,2.5mm | ||
| Driving speed | Measuring | Sampling length = 0.25mm When Vt=0.135mm/s | |
| Sampling length = 0.8mm When Vt=0.5mm/s | |||
| Sampling length = 2.5mm When Vt=1mm/s | |||
| Returning | Vt=1mm/s | ||
| Evaluation length | 1～5L selectable | ||
| Metric/Imperial | Conversion | ||
| Auto off | √ | ||
| Spomin | 7 Groups | —– | |
| Pc interface | RS-232C | —– | |
| Built in Li-ion battery | Rechargeable | ||
| Operating condition | TEMP | 0～50℃ | |
| Vlažnost | ﹤85%RH | ||
| Dimenzija | 140×52×48mm（5.5×2.2×1.9inch） | ||
| Neto teža | 420g | ||
BGD 930 Tester površinske hrapavosti
Optional Parameters
BGD 1290—RS-232 or USB cable
BGD 1291—Programska oprema
BGD 1292—Sensor for deep groove
BGD 1293—Sensor for curve surface
BGD 1294—Measuring stand
BGD 930 Tester površinske hrapavosti
Tester površinske hrapavosti is widely used in production site to measure surface roughness of various machinery-processed parts, calculate corresponding and clearly display all measurement parameters。
| Specifikacije | Informacije o naročanju | ||
| BGD 930 | BGD 931 | ||
| Standardno | ISO4287,DIN4768,JIS B,ANSI 146.1 | ||
| Merilno območje | Ra | 0.005～16μm/1.000～629.9μinch | 0.050～10μm/1.000～400.0μinch |
| Rq | 0.005～16μm/1.000～629.9μinch | —- | |
| Rz | 0.020～160μm/0.780～6299μinch | 0.020～100μm/0.780～4000μinch | |
| Rt | 0.020～160μm/0.780～6299μinch | —- | |
| Natančnost | ≤±10% | ||
| Resolucija | 0.001μm（reading＜10μm） | ||
| 0.01μm（10μm≤reading＜100μm） | |||
| 0.1μm（reading ≥100μm） | |||
| Fluctuation of display value | ≤6% | ||
| Profile digital filter | Filtered profile | Rc,PC-RC,GAUSS | —– |
| Non- filtered profile | D-p | —– | |
| Senzor | Radius | 5μm | 10μm |
| Material | Diamant | Diamant | |
| Merilna sila | 4mN（0.4gf） | 16mN（1.6gf） | |
| Probe angle | 90° | 90° | |
| Vertical radius of guiding head |
48mm | 48mm | |
| Maximum driving stroke | 17.5mm/0.75inch | ||
| Cutoff length | 0.25mm,0.8mm,2.5mm | ||
| Driving speed | Measuring | Sampling length = 0.25mm When Vt=0.135mm/s | |
| Sampling length = 0.8mm When Vt=0.5mm/s | |||
| Sampling length = 2.5mm When Vt=1mm/s | |||
| Returning | Vt=1mm/s | ||
| Evaluation length | 1～5L selectable | ||
| Metric/Imperial | Conversion | ||
| Auto off | √ | ||
| Spomin | 7 Groups | —– | |
| Pc interface | RS-232C | —– | |
| Built in Li-ion battery | Rechargeable | ||
| Operating condition | TEMP | 0～50℃ | |
| Vlažnost | ﹤85%RH | ||
| Dimenzija | 140×52×48mm（5.5×2.2×1.9inch） | ||
| Neto teža | 420g | ||
