NHD-II-16 Refractoriness Test Furnace
1
2
3

NHD-II-16 Печь для испытания огнеупорности

CHY-I-16 Тестер усталости при постоянной нагрузке CHY-I-16 Тестер усталости при постоянной нагрузке
Устройство защиты от химической коррозии HXF Устройство защиты от химической коррозии HXF

Категория:

Описание

NHD-II-16 Печь для испытания огнеупорности

Введение

The electric furnace is discontinuous running box-type high temperature furnace with molybdenum rod heating unit. It is used in refractory temperature detection for refractory laboratory,engineering mining enterprises,scientific research institution etc.

Furnace temperature can be measured, indicated and controlled. The equipment meets the requirements of ГБ/Т 7322-2017 Refractory products-Determination of refractoriness and ISO528-1983 Refractory products; Determination of pyrometric cone equivalent (refractoriness). This equipment is used in testing degree of fire resistance of refractories. Its measuring range is 1580~1800℃.

NHD-II-16 Печь для испытания огнеупорности

Основные технические параметры:

1.Rated temperature:1650℃

2.Sample stents is graphite electrode material temperature resistance more than 1800℃, can also use corundum material

3.Sample is triangle cone, breadth 10—20мм.

4.Cone rotate speed (об/мин): 3-5 об/мин

5. Test method refer to the standard: GB/T7322-2017 (ISO528-1983)“The refractory Refractoriness test method”

6. Can with observation hole, install a CCD camera system on the observation hole position, to observe the shape of the sample at high temperature in real time, and processed into computer display. Минимум 1 ℃ of a image.

7. Номинальное напряжение:380В, 2 phases with zero line.

Рейтинг власти: 6кВт

8. Temperature measuring with the standard pyrometric cone.

9. CCD pixel is more than 10 миллион, color.

10. Automatic test and analysis software in English.

11. Intelligent PID temperature control program, can be set up 50 program temperature curve. Set the heating rate.

12. Start current limiting protection, защита от перегрузки.

13. The cone bending observation state is full horizontal color viewing Angle;

14. Automatic image recording system: equipped with a special image acquisition card, the standard image format is automatically recorded to the hard disk.